B&K Vibro Compact, Ultra Low Frequency Accelerometer
Brüel & Kjaer Vibro Compact, Ultra Low Frequency Accelerometer
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $512.67 |
| 5-9 | $487.04 |
| 10-24 | $476.78 |
| 25-49 | $456.28 |
| 50-99 | $446.02 |
| 100+ | $435.77 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Hermetically sealed
- Rugged (IP66/ IP67) and corrosion resistant design
- Field proven MIL-C-5015 connector
AS-070/001/050 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Acceleration Range
Frequency Range (Nominal)
Output Type
Mounting Type
Features
- Apx. Weight 80 g
- Capacity 5000 g
- Constant Current Supply +24 V Nominal (18 to 30 Vdc)
- Environmental Rating IP67/IP68
- Frequency range 0.32 Hz to 10 kHz (± 3 dB)
- Housing Material Stainless Steel
- Linearity ≤ 1 %
- Measuring Range ±50 g
- Mounting Screw 2 Allen screws M4 x 16
- Mounting Torque 3.0 Nm
- Nominal Sensitivity at 80 Hz 100 mV/g
- Operating Temperature Range -55 to 125 °C (-67 to 257 °F)
- Output Resistance <100 Ω
- Overload Capacity - Constant 500 g
- Resonant Frequency (Typical) 25 kHz
- Sensitivity Accuracy ± 20%
- Storage Temperature Range -20 to 70 °C (-4 to 158 °F)
The AS-070 is designed for measurement of vibration acceleration. It covers a broad application range like monitoring of turbines compressors pumps generators etc. Its robust and high-quality design make this sensor the perfect match for demanding applications.
The acceleration sensor operates according to the piezo-electric Ringshear principle. In the sensor the piezo-element and an internal mass forms a spring-mass damping system. When this system is subjected to vibrations an electrical charge proportional to the vibration acceleration is produced. An integrated amplifier converts this charge signal into a usable voltage signal.
Brüel & Kjaer Vibro Accelerometer Selection Table
| Model | picture | sensor | Sensitivity | Sensitivity | Frequency | Resonant | measuring | connector | connector | cable |
|---|---|---|---|---|---|---|---|---|---|---|
AS-667 |
| compression type | 100 mV/g | ± 10% | 0.5 Hz to 13 kHz: (±3 dB) | typ 30 kHz | 60 g | M12 - 4 pole | top | mountable |
AS-668 |
| compression type | 100 mV/g | ± 10% | 0.5 Hz to 13 kHz: (±3 dB) | typ 30 kHz | 60 g | M12 - 4 pole | lateral | mountable |
AS-063 |
| compression type | 100 mV/g | ± 5% | 1.5 Hz to 13 kHz (± 3 dB) | 35kHz ± 3 kHz | 80 g | MIL-C-5015 | top | mountable |
AS-062 |
| compression type | 100 mV/g | ± 5% | 1.5 Hz to 13 kHz (± 3 dB) | > 20 kHz | 80 g | n.a. | lateral | integrated |
AS-070/001 |
| shear type (ring) | 100 mV/g | ± 20% | 0.32 Hz to 10 kHz (± 3 dB) | > 25 kHz | 50 g | n.a. | lateral | integrated |
