Stainless Steel Strip Heater Diagonal Terminals
Channel Strip Heaters, Ceramic Insulated, 38.1 x 9.53 mm (1 1/2 x 3/8")
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $100.48 |
| 10-24 | $95.46 |
| 25-49 | $93.45 |
| 50-99 | $89.43 |
| 100-199 | $87.42 |
| 200+ | $85.41 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- A Reliable Heat Source with Seamless Stainless Steel Sheath
- Flat Surface Mounting Installations
- Used in Hundreds of Industrial and Commercial Heating Applications
- Ovens
- Hot Plates
- Dies
- Molds
- Drying
- Melting
- Baking
- Incubators
- Platens
- Food Warmers
- Welding Preheating
- Air Heating
- Sealing Bars
- Thermoforming
- Tank Heating
CSH00296 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Power
Supply Voltage
Power Density
Strip Dimension
Form Factor
Sheath Material
Max. Temperature
Number of Mounting Holes
Termination
Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area.
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.
Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
Lead Wire Termination: 10 amp
Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
16 mm (5/8") Wide Heaters: +0.000, -0.005"
25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
6 mm (1/4") Thick Heaters: +0.000, –0.005"
8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
Up to 24": ±1/16"
Over 24": ±1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Special Bushings: 13 x 16 mm (1/2 × 5/8")
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.
Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
Lead Wire Termination: 10 amp
Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
16 mm (5/8") Wide Heaters: +0.000, -0.005"
25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
6 mm (1/4") Thick Heaters: +0.000, –0.005"
8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
Up to 24": ±1/16"
Over 24": ±1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Special Bushings: 13 x 16 mm (1/2 × 5/8")
| Model No. | Length | Wattage | Watt Density | |||
|---|---|---|---|---|---|---|
| 120V | 240V | inch | mm | Watt/in2 | Watt/cm2 | |
| — | CSH00294 | 71⁄2 | 190.5 | 200 | 19 | 3 |
| — | CSH00295 | 9 | 228.6 | 500 | 31 | 5 |
| CSH00296 | — | 101⁄2 | 266.7 | 250 | 12 | 2 |
| CSH00297 | — | 101⁄2 | 266.7 | 400 | 19 | 3 |
| — | CSH00298 | 12 | 304.8 | 500 | 18 | 3 |
| — | CSH00299 | 151⁄4 | 387.4 | 500 | 13 | 2 |
| — | CSH00300 | 17 | 431.8 | 1000 | 22 | 3 |
| — | CSH00301 | 177⁄8 | 454.0 | 350 | 7 | 1 |
| — | CSH00302 | 177⁄8 | 454.0 | 500 | 10 | 2 |
| — | CSH00303 | 18 | 457.2 | 1000 | 20 | 3 |
| — | CSH00304 | 181⁄2 | 469.9 | 500 | 10 | 2 |
| — | CSH00305 | 221⁄2 | 571.5 | 1000 | 15 | 2 |
| — | CSH00306 | 24 | 609.6 | 1000 | 14 | 2 |
| — | CSH00307 | 251⁄2 | 647.7 | 1000 | 13 | 2 |
| — | CSH00308 | 26 | 660.4 | 1600 | 20 | 3 |
| — | CSH00309 | 261⁄2 | 673.1 | 1500 | 18 | 3 |
| — | CSH00310 | 301⁄2 | 774.7 | 750 | 8 | 1 |
| — | CSH00311 | 311⁄2 | 800.1 | 800 | 8 | 1 |
| — | CSH00312 | 357⁄8 | 911.2 | 1000 | 9 | 1 |
| — | CSH00313 | 36 | 914.4 | 1000 | 9 | 1 |
| — | CSH00314 | 50 | 1270.0 | 1000 | 6 | 1 |
| — | CSH00315 | 62 | 1574.8 | 1500 | 7 | 1 |
