1/8 DIN 6-Digit Rate Meter/Totalizer
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $315.01 |
| 10-24 | $299.26 |
| 25-49 | $283.51 |
| 50-99 | $267.76 |
| 100-499 | $252.01 |
| 500+ | $236.26 |
Please contact Technical Sales Team for assistance.
- Measures Rate from 0.5 Hz to 30 kHz
- Totalizes Up or Down from -99,999 to 999,999 or Acts as Accumulating Stopwatch
- 6-Digit, 7-Segment LED, 14.2 mm (0.56")
- Sensor Excitation Output
Signal Input Choices (Selectable by DIP Switch) - TTL Compatible with Protection to 25 V
- Low Level (25 mV rms)
- High Level Signals Protected to 115 V
- NAMUR
- Open Collector PNP or NPN
Communications and Control - RS232 Output Optional
- Optional Dual 5A Form C Relays
- Analog Output, Scalable, 4 to 20 mA, 0 to 20 mA, 0 to 10 V (Optional)
DPF702 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Accuracy Value
Supply Voltage
Retransmission/Analog Output
Form Factor
Measurement Type
Communication Protocols
From Dec 1st 2018, INFCTRA & DPF700 Rate Meter models will be discontinued. As a possible replacement, please check out DPF20 or consult our sales for UL certified replacement for details.
The DPF701 Series ratemeter/ totalizer offers user programming via the 5 front-panel keys. Scale factor may be programmed from -99,999 to 999,999 (any decimal point, multiply or divide), while offset may be programmed from -99,999 to 999,999 (any decimal point). Programs are stored in non-volatile memory, with three levels of program lockout for security. Optional features include Hi or Lo setpoints for control or alarm, plus RS232 communication. Fixed decimal point or autoranging is standard.
SPECIFICATIONS
Functions: rate and totalize selected by menu
Display: 6-digit, 7-segment red LED display
Inputs
Type: single input. TTL, CMOS, NPN open collector, contact closure and magnetic pickup compatible selected by dip switch. Non-isolated.
Level: max. 60 V min. 25 mV rms
Frequency: 30 kHz max.
Excitation: regulated, 5.0 V to 50 mA, 8.2 V to 70 mA, or 12.4 V to 100 mA selected by DIP switch
Accuracy:± 1 /2 LSD of total 0.01% of the rate ±1 1 /2 LSD
Setpoints: Two, optional
Alarm Outputs: optional
Communication: RS-232, analog output, optional
Rate Measurement Technique: 1/x
Gate Time: 0.30 sec
Decimal Point: programmable or autoranging
Trigger Slope: selectable by DIP switch
Leading Zeros: blank
Power: 115 or 230 ±15% Vac
Dimensions: 1.9 H x 3.8 W x 6" D (48 x 96 x 152 mm)
Panel Cutout: 45 H x 92 mm W (1.8 H x 3.6" W)
Weight: 454 g (16 oz)
The DPF701 Series ratemeter/ totalizer offers user programming via the 5 front-panel keys. Scale factor may be programmed from -99,999 to 999,999 (any decimal point, multiply or divide), while offset may be programmed from -99,999 to 999,999 (any decimal point). Programs are stored in non-volatile memory, with three levels of program lockout for security. Optional features include Hi or Lo setpoints for control or alarm, plus RS232 communication. Fixed decimal point or autoranging is standard.
SPECIFICATIONS
Functions: rate and totalize selected by menu
Display: 6-digit, 7-segment red LED display
Inputs
Type: single input. TTL, CMOS, NPN open collector, contact closure and magnetic pickup compatible selected by dip switch. Non-isolated.
Level: max. 60 V min. 25 mV rms
Frequency: 30 kHz max.
Excitation: regulated, 5.0 V to 50 mA, 8.2 V to 70 mA, or 12.4 V to 100 mA selected by DIP switch
Accuracy:± 1 /2 LSD of total 0.01% of the rate ±1 1 /2 LSD
Setpoints: Two, optional
Alarm Outputs: optional
Communication: RS-232, analog output, optional
Rate Measurement Technique: 1/x
Gate Time: 0.30 sec
Decimal Point: programmable or autoranging
Trigger Slope: selectable by DIP switch
Leading Zeros: blank
Power: 115 or 230 ±15% Vac
Dimensions: 1.9 H x 3.8 W x 6" D (48 x 96 x 152 mm)
Panel Cutout: 45 H x 92 mm W (1.8 H x 3.6" W)
Weight: 454 g (16 oz)
Rated 4 out of
5
by
erosion researcher from
Easy to set up for rate measurement
I'm using this with a turbine flow sensor (model FTB602B) and with the friendly assistance of the Omega tech support, it was easy to get the two working together.
Date published: 2016-03-19
i have a dpf700 meter with a turbine fan flange pickup that has a K factor of 5.64. what setting should i set on my dpf700 meter?
Thank you for your inquiry! If you are looking to track the flow rate then you will have to go to the scale portion of the menu and enter the scale factor based on the units of measure. The scale factor and further programming information can be found on page 20 of the manual.
Date published: 2022-04-14