SS Immersion Heater with Multiple Screw Plug Sizes
Screw Plug Immersion Heaters
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $104.20 |
| 5-9 | $98.99 |
| 10-24 | $96.91 |
| 25-49 | $92.74 |
| 50-99 | $90.65 |
| 100+ | $88.57 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- 1/2, 3/4, and 1 1/4 NPT Screw Plugs
- 316 SS Sheath
- 400 to 1000 W
- 120 and 240 V, 1-Phase
- Single Thread Pipe Construction
EMH-060-120V Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Connection Type
Heating Element Length
Power
Power Density
Supply Voltage
Form Factor
Supply Voltage Type
Heated Medium
Sheath Material
SPECIFICATIONS
Power: 120 and 240 V, 1-phase
Watt Density:
5/8" Diameter: 37 W/in²
¾" Diameter: 38 W/in²
1¼" Diameter: 24 W/in²
Termination:
5/8, ¾" Diameter: 12" fiberglass leads rated to 250°C (482°F), epoxy potting rated to 130°C (266°F) 1¼" Diameter: 8-32 screw and nut terminals
Sheath: 316 SS
Screw Plug and Threads: 316 SS
TOLERANCES
Wattage tolerances are held to 5 to 10% at rated voltage. Length tolerances are ±2% with a ±1/16" minimum
Power: 120 and 240 V, 1-phase
Watt Density:
5/8" Diameter: 37 W/in²
¾" Diameter: 38 W/in²
1¼" Diameter: 24 W/in²
Termination:
5/8, ¾" Diameter: 12" fiberglass leads rated to 250°C (482°F), epoxy potting rated to 130°C (266°F) 1¼" Diameter: 8-32 screw and nut terminals
Sheath: 316 SS
Screw Plug and Threads: 316 SS
TOLERANCES
Wattage tolerances are held to 5 to 10% at rated voltage. Length tolerances are ±2% with a ±1/16" minimum
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| *Wattages are based on a unit operating immersed in water. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rated 5 out of
5
by
stephen1 from
works good for boiling water
I have bought several of these things over the years. 400 watts is not a lot of energy, but at 110 volt, this wattage is reasonable. omega sells a 220 version of this thing i have also used. boils water and lasts a long time. i have used these for continuous duty boiling. good part
Date published: 2019-04-17
Rated 5 out of
5
by
Legron from
Perfect Solution!
Hydronic heating system solution done right the first time.
Date published: 2018-05-12
Can these be turned on without being submerged in water? We are having issues with ours being turned on when water is not in the container.
These Heater are designed to work only when submerged and will fail in short order if not. They should be located in a tank were the liquid level never goes below were the full length of the Heater is located.
Date published: 2021-05-04
Curious what the temperature of the heater is? On the 37 w/in2 model.
Our immersion heaters need to be immersed in liquid while powered as to not overheat and fail. Because of the materials used in this heater we recommend a thermostat or controller limit the temperature to 266 deg F.
Date published: 2020-01-22
For the 1000w heater what is the highest temperature the unit will heat up to, if the unit is given full voltage and amps?
The Heater generates 1000 Watt of Heating capacity and the characteristics of what is being heated like gallons and the specific heat of what is being heated will determine the maximum temperature. You can find calculations on line or contact Omega's temperature group at temp@omega.com for assistance.
Date published: 2021-05-17
What is the pressure rating for these heaters
The maximum working pressure for the EMH series Heaters is 100 PSI.
Date published: 2021-09-21
