Chart Recorder for Temperature & Humidity
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $684.19 |
| 5-9 | $649.98 |
| 10-24 | $615.77 |
| 25-49 | $581.56 |
| 50-99 | $547.35 |
| 100+ | $513.14 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Charting Web Server Application
- Alarms by Email or Text Message
- Record Years of Data on Popular SD Cards
- Temperature
- Humidity
- Dewpoint
- No Special Software Required
- NEW Feature Added: Units with Dual Temperature and Humidity Probes
- Compatible with Omega Enterprise Gateway
- Download iServer Software
- Log data with Omega Enterprise Gateway(OEG)
ITHX-SD-2 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Additional Feature
Measurement Type
Number of Measurements
Input Type
Maximum Samples
Display
Power
Data Interface
Max Sampling Rate
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
Rated 5 out of
5
by
Cjnngnr from
Great Features
We have incorporated this device in a Environmental Monitoring Unit for an Antenna Radome to provide us with historical data on the Environmental conditions within the Radome. We have storage data from one system for over 3 years recorded which allows feedback to the OEM of the Antenna and Radome.
Date published: 2017-01-31
Rated 1 out of
5
by
TTHT from
Device Does Not Connect and Bad Service
Ordered this device for alarms but it has difficulty connecting to network and randomly decides not to connect when hardwired to the computer for configuration. Omega has terrible customer service. Even with the warranty they did not help me fix my problem (took a year of me emailing and calling them before they responded). They sent me back the device saying there was no problem. It still does not work.
Date published: 2020-10-08
Rated 5 out of
5
by
meowcake from
Works as expected
Been installed in a proper machine shop with oil vapor and the likes.
Sensor element is trash in my opinion (5% change over 2 years) but designed to be replaced yearly if maintaining certification is your requirement. The iTHX device, although showing it's age, still trucks along just fine. Gathering data is easy and there is no software crippling (why I stay with Omega, it does what it says it does today and 10 years from now). Their documentation allows for anything from a highly engineered system's dev team to a script writer to easily integrate this sensor.
Exactly what was advertised, and has never had issues. Also, the last two sensors were of a higher caliber than previously. It's nice to be able to call someone at this price point as well.
Date published: 2016-09-27
Rated 4 out of
5
by
Flex from
Our experience with the Chart Recorder
These are nice for laboratory environmental monitoring/logging but somewhat cumbersome to set up and retrieve data from. I could not download data via the Ethernet port to my pc but was able to do so via the SD card. Problem with that was that recording start date and time has to be set each time Standby is pressed and the SD card is taken out then put back in. Overall a decent instrument.
Date published: 2021-10-27
Rated 1 out of
5
by
FrustratedITAdmin from
Solid devices with absolutely mediocre management
These devices run on ancient software, and forget their configured settings every time they lose power. They use 9V batteries for backup, which is not ideal because they can't be charged by the main power source, so if you need to deploy a bunch of these, it will be impossible to keep track of constantly replacing the batteries. The server product is difficult to find information on, and is also garbage with extremely limited features and functionality. They do not support WiFi or PoE for easy deployment options. The only pro to these is that they are accurate, and the device itself is very durable. Everything else stinkss though...look elsewhere.
Date published: 2021-01-11
Rated 5 out of
5
by
Booky from
Always performs to my expectations
I have been using these for years now and they keep on working.
Date published: 2018-02-15
Rated 5 out of
5
by
Ken1 from
Great service and products.
I bought this item and when I received it we found that it had a cracked probe. I called Omega and talked to an engineer about this and he immediately sent out a replacement with hardly no questions asked. It was also sent overnight at no charge to me. GREAT service and products.
Date published: 2017-06-01
RoHS 2015/863 - View Certificate
CE Approved
UL cULus Listed
The iTHX-D3 used a separate End Character for Temp, Hum and Dew Point. We knew which one was being transmitted to the PLC based on that end character. Now the D3 has been replaced by the SD and it does not allow us to do this. What options do we have now?
The SD version does not have the option for the end character that is correct. However management has reinstated the D3 unit so you can contact customer service and return the SD model and order a D3 to fit your needs.
Date published: 2019-08-24
So, we have been using these devices without fail in multiple locations. As of today (08FEB20), whenever we log into the web app, and attempt to do a download of data at the 1 month block it says Failed - No File.
Please e-mail the software you are using and version to DAS@OMEGA.com and we will try to resolve with Engineering.
Date published: 2020-02-12
After disabling probe 2 I am getting HT Probe 1 Error. Is the sensor defective?
Hello, thank you for your question. If you already saved the configuration for 1 sensor only, then something as a lose connection could be the reason for this message. Please make sure the sensor is fully inserted into the socket. If this is not the case, please contact our Data Acquisition experts for further troubleshooting. The email is das@omega.com or you can give us a call and ask for DAS technical support.
Date published: 2020-10-12
We just got ours in. We have an error flashing on display "HTProbe2 *ERROR*". It appears it is set up for the dual probe. How can I clear this error and/or correct setup?
You simply have to go to the device web page and enter setup and disable sensor 2 under configuration and save.
Date published: 2020-02-12
I have 2 iTHX-SD devices that I placed in DHCP mode by pressing °C/°F and TIME/IP button during power-on. Both devices now have same MACID which is NOT the ones that were assigned during manufacture. MACID's are supposed to be hard coded. Why this happen?
A MAC address should never change but sometimes (rarely) they do. We haven't been able to narrow down the reason why it happens, but we do have a solution.
There is an unlisted command string to overwrite the MAC by telnetting into port 2002:
‘s –MC[macaddr]’
The ‘s’ must be lowercase and the ‘MC’ must be uppercase.
Examples:
s –MC00:03:34:00:c3:4e
s –MC00:03:34:00:B9:B6
c
(the “c” confirms the change)”
If you have more questions on this, please send us an email to das@omega.com for your specific case.
Regards.
Date published: 2020-03-17
When I try downloading a months worth of data from the device using the web interface (Data Retrieval), every time the file fails to download. If I download a single day's worth of data that works ok. what can I do to ensure the data downloads?
We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2022-03-09
Is this product compatible with Windows 10?
Hello, thank you for your question.
Yes, it is compatible. This unit doesn't require a special software except a Web Browser like Explorer or Mozilla Firefox. We also offer a data logging and monitoring software OEG that provides extended Historian, Alarming, Analytics and OPC UA/DA system integration support.
Date published: 2020-03-02
According to the Product Spec sheet for Omega iTHX-SD Chart Recorders, regarding "Sensor and Calibration" it states "It is not necessary to take the iTHX-SD out of service for routine calibration." Does this mean that routine calibration is not required?
We sell the pre-calibrated probes, you could order them three or four weeks before the ones you have expire (that is typical lead time for you), that way you do not have to put your devices out of service.
Thank you.
Date published: 2019-07-18
How do I get rid of the "HProbe2 Error" message?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2022-06-28
How do you use the alarm relay function on the iTHX-SD to drive a stacklight visual alarm or audible buzzer alarm? What equipment would be required to do this?
Please e-mail your question to Das Engr Dept-DAS@OMEGA.COM and they will try to assist you.
Date published: 2022-03-23
i want to know how to connect to kepware and get data from the ithx sd. please
Hello, thank you for question. In the case of detailed technical support inquiries like this one, please send us an email to das@omega.com.
Date published: 2021-05-20
We currently have iTHX-W3 units. We communicate to them through a network service that we wrote in-house. If we purchase one of these and connect it with the same software, will the communications be compatible with what is talking to the iTHX-W3?
Thank you for your question. The commands are the same, just keep in mind the unit ships with factory default Ip which you may have to change.
Date published: 2021-04-13
Can the iTHX-SD be ordered with a 1 year Calibration Certificate?
Hi Susan,
The iTHX-SD can be ordered with NIST traceable calibration option. Please send request to SALES@OMEGA.COM for part#, price, and lead time.
Best regards,
OMEGA
Date published: 2022-09-10
My unit appears to be functioning normally--it displays temp & humidity & I can access these readings over internet. Recording is "ON". The "R" on the displayed "%RH" is flashing. What does that mean?
Thank you for your question. This could indicate either not sufficient power or hardware issue. If you would like to return for repair please contact Customer Service at 1-800-622-2378 or CSERVICE@OMEGA.COM and they will be able to assist you.
Date published: 2022-06-02
Can I specify an SMTP server by hostname rather than IP address? This would be helpful since IP addresses are more likely to change than hostnames. Thank you.
I am sorry IP address is the only way to specify the SMTP server.
Date published: 2020-02-13
Received ours today Dec 23, 2019. Also am getting the HTProbe2 Error. Can an OMEGA engineer clear this up please?
Once you get the units connected on the network, you can change the setup on the IP page and the error will clear.
Date published: 2021-10-29
Hello I am unable to view the chart in win 10 pro or use the java selection. Ca you help
Due to security issues Java is no longer supported by web browsers there please click on the following link down load and install our Omega Enterprise Gateway software which you can use to monitor and log the data:
ftp://ftp.omega.com/public/DASGroup/products/OEG/Omega_Enterprise_Gateway_64bit.zip
Date published: 2022-11-17
What is the calibration procedure for this device? Would my contractor be able to calibrate in house?
Thank you for your question. The probe is digitally calibrated and unfortunately cannot be done in the field, but you can perform calibration adjustments when connected to Ithx main unit through the webserver.
Date published: 2022-10-13
I removed the SD card and saved the readings. When I re-install the card, the unit does not appear to be recording again. I have it wall-mounted and not connected to a computer or network. How do I get it to take readings again?
Please send your issues with ITHX-SD to DAS Tech Support -DAS@OMEGA.COM
Date published: 2020-05-28
Can the iTHX-SD be used as a handheld device to quickly take readings at multiple locations? Ultimately we plan to position the device in a permanent location and connect it to our network but I'm wondering if the device can also be used as a handheld.
Hello I am sorry it is not designed as a hand held device you cannot start and stop the device except using a PC through the network to send commands.
Date published: 2019-11-21
