260°C Max Constant Wattage Heating Cable 120-480 Vac
High Temperature Constant Wattage Heating Cable (Price Per Foot)
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $9.24 |
| 5-9 | $8.78 |
| 10-24 | $8.59 |
| 25-49 | $8.22 |
| 50-99 | $8.04 |
| 100+ | $7.85 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Continuous Exposure Rating up to 500°F
- Low Watt Density
- Parallel Resistance Heater
- Cut-to-Length at the Job Site
- Constant Watt Density
- All Common Voltages Available
- Moisture and Chemical Resistance
- Continuous Electrical Ground
- Designed for freeze protection and process temperature maintenance.
KE12-120 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Supply Voltage
Power Density
Maximum Temperature Exposure
Wire Gauge
Approx. Cable Size
Insulation Material
Minimum Purchase Length
- Maximum Operating Temperature 287°C (550°F)
- dielectric Strength In excess of 2500 V
- Wire Material Nickel-chromium resistance wire
The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.
OMEGALUX™ KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
Max. Circuit Length**-KE Series
OMEGALUX™ KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
Max. Circuit Length**-KE Series
| Power | 120V | 208V | 240V | 277V | 480V |
| 4 Watts/ft | 349' | 606' | 699' | 806' | 1398' |
| 8 Watts/ft | 247' | 428' | 494' | 570' | 988' |
| 12 Watts/ft | 202' | 350' | 403' | 466' | 807' |
Can SRM/E5-2CT cable be cut to a 3 inch length and still work? What is the minimum length it can be cut to? How do you connect power to one end of the cable and how do you terminate the other end? I have same questions about KE12-240 cable.
Thank you for your inquiry. Please send your application requirements to heaters@omega.com and we can review and advise.
Date published: 2021-06-02
Accessories
