LVIT Linear Position Sensors with Rod Ends
0 to 200 mm, 0 to 10 Vdc Output
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $632.96 |
| 10-24 | $601.31 |
| 25-49 | $588.65 |
| 50-99 | $563.33 |
| 100+ | $550.68 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Low Cost, Robust Construction
- Contactless Operation Prevents Wearout from Dithering or Cycling
- Excellent Stroke-to-Length Ratio
- 19 mm (0.75") Diameter Anodized Aluminum Housing Sealed to IP67
- Wide Choice of Range: 25 to 200 mm (1 to 8") Full Scale
- High Accuracy with Low Linearity Error
- Radial Cable Exit with Swivel Rod Eye Ends
- Designed to Operate Under Adverse Temperature, Vibration, Shock, and Humidity Conditions
LDI-119-200-A010A Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Range
Electrical Output
Housing Length
Features
Linearity
Resolution
Rating
Housing Diameter/Width
The LDI-119 Series LVIT (Linear Variable Inductive Transducer) position sensors from OMEGA™ are contactless devices designed for factory automation and a variety of industrial and commercial applications such as motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brakes, and packing equipment. With their compact device, superior performance, and excellent stroke-to-length ratio, the LDI-119 sensors are ideal for both industrial testing, laboratories, and OEM applications.
LDI-119 sensors are offered in 6 full scale ranges from 25 to 200 mm (1 to 8"). Operating from a variety of DC voltages, these sensors offer a choice of outputs and all include the field programmability calibration feature. LDI-119 products come with radial exiting cable and two swivel rod eye ends for easy installation.
The LDI series also include a larger body version, the LDI-127, for those applications needing a heavier duty unit.
Specifications
Analog I/Os:
0 to 10V output with 12 to 30V input, 35 mA max;
4 to 20 mA (3-wire) output with 18 to 30V input,
60 mA max 75°C (167°F max)
Measuring Range: 25 to 200 mm (1 to 8") full scale
Linearity Error: ±0.15% of Full Scale Output (FSO) typical, ±0.25% max
Resolution: 0.025% of FS
Update Rate: 300 Hz nominal
Operating Temperature: -20 to 85°C (-4 to 185°F)
Temperature Coefficient: 0.015% of FS/degree°C
Vibration: 5 to 20 Hz, 0.5" p-p; 20 to 2000 Hz, 4.2 g p-p
Shock: 1000 g, 11 ms
Terminations: IEC IP67
Humidity: 95% RH, non-condensing
Housing Material: Aluminum
LDI-119 sensors are offered in 6 full scale ranges from 25 to 200 mm (1 to 8"). Operating from a variety of DC voltages, these sensors offer a choice of outputs and all include the field programmability calibration feature. LDI-119 products come with radial exiting cable and two swivel rod eye ends for easy installation.
The LDI series also include a larger body version, the LDI-127, for those applications needing a heavier duty unit.
Specifications
Analog I/Os:
0 to 10V output with 12 to 30V input, 35 mA max;
4 to 20 mA (3-wire) output with 18 to 30V input,
60 mA max 75°C (167°F max)
Measuring Range: 25 to 200 mm (1 to 8") full scale
Linearity Error: ±0.15% of Full Scale Output (FSO) typical, ±0.25% max
Resolution: 0.025% of FS
Update Rate: 300 Hz nominal
Operating Temperature: -20 to 85°C (-4 to 185°F)
Temperature Coefficient: 0.015% of FS/degree°C
Vibration: 5 to 20 Hz, 0.5" p-p; 20 to 2000 Hz, 4.2 g p-p
Shock: 1000 g, 11 ms
Terminations: IEC IP67
Humidity: 95% RH, non-condensing
Housing Material: Aluminum
Rated 4 out of
5
by
DAV 49 from
Great Product but suggest some improvements
I installed this on linkage to provide stable position feedback to control a drive motor. It worked great. I would suggest making the connection points a little larger.
This unit will take a 10-32 screw. I would have preferred a 1/4-20.
Also I note the cable length in the description.
I bought a 100mm unit with 4-20 ma signal
Date published: 2018-05-07
Can I extend the cable on these?
Yes, You can extend the cable using a 4 conductor shielded cable. we offer this type of cable in 100' spools. Part# TX4-100
Date published: 2022-01-25
What standard lengths are available for the cable, and an estimate for each length, please? Do you make sensors with customized cable lengths?
Thank you for your inquiry, the LDI series only comes with a 1 M cable. Unfortunately we are not able to customize the cable length on this sensor. You can extend the cable using a 4 conductor shielded cable. we offer this type of cable in 100' spools. Part# TX4-100
Date published: 2022-05-16
Will the these sensors work a strong DC magnetic filed?
Thank you for your question?
The units would be effected by the magnetic-field. The amount of disruption we are unable to tell?
Hope this was helpful?
Date published: 2019-07-03
Is the output convertible to "plug and play" USB for a desktop?
Thanks for your question. The LDI-119 are only available with an analog output of either 0-10 Vdc or 4-20 mAdc. We do not offer a "plug and play" USB converter for this. You could connect it to a computer using a USB data acquisition system but there would be some initial setup required. A good option for this would be the INET-600 USB Data Acquisition System with an INET-510 screw terminal box. Free software is included. You would also need a 24 Vdc power supply for the sensor. The PSR-24L would be suitable and could power multiple sensors if needed. Our Tech Support engineer has also emailed you if you have any further questions.
Date published: 2019-06-04
