Load Cells

The LCR series are aluminum to be lightweight and durable in industrial applications. They have ±0.03% linearity and a 3 mv/V output in capacities from 25 to 10,000 lbf.

The LCP series can be used on many types of pinned joints to control or monitor reaction load on the pins. They are available in capacities from 750 to 30,000 kgf.

The LCHD-IS series are FM rated intrinsically safe. They have ±0.1% linearity and a 4 to 20 mA output in capacities from 10 lbf to 400,000 lbf.

The LC8100 series are ideal for measuring clamping forces and bolt loading forces. They have ±1.0% linearity and a 2 mv/V output in capacities from 100 to 750,000 lbf.

The LCM101 metric series are ideal for tank weighing, hoppers, suspended loads and scales. They have ±0.03% linearity and a 3 mv/V output in capacities from 25 to 10,000 kgf.

The LCM1001 series of metric rugged, stainless steel load cells are ideal for axial compression applications. They are available in capacities from 250 to 10,000 kgf

The LCMHD metric series are even lower profile than our LC402 series. They have ±0.2% or better linearity and a 2 or 3 mv/V output in capacities from 2.5 kgf to 7,500 kgf.

The LC8151 tall series are ideal for measuring clamping forces and bolt loading forces. They have ±0.5% linearity and a 2 mv/V output in capacities from 3,000 to 150,000 lbf.

LC204 tension and compression load cells are ideal for test stand and scale applications. They have ±0.15% linearity in capacities from 25 to 10,000 lbf.

The LCPB series of aluminum, compression load cells are ideal for scale design where space is limited such as postal scales, airport baggage scales or retail checkout scales.

The LCDA series of nickel-plated steel, tension and compression load cells are suitable for industrial applications. Available in capacities from 25 to 500 lbf.

The LCMWD metric series are ideal for measuring clamping forces of a bolt. They have ±0.75% or better linearity and a 2 mv/V output in capacities from 1,000 to 100,000 N.

The LC601 series of stainless steel, tension and compression load cells are suitable for low capacity weighing applications. Available in capacities from 1 to 25 lbf.

The CC1 family of stainless steel, ATEX certified, load cells are primarily designed for use as polished rod (pump off control) sensors in oil and gas pumping applications.

The LC701 series of tension load cells are ideal for crane cables, support rods, and engine test beds, etc. They are available in capacities from 250 to 2,000 lbf.

The LCM305 metric series have a ±0.15% linearity and 2mv/V output in capacities from 100 N to 50,000 N. Ideal for prototype structures and industrial weighing.

The LCCE series has an extra level of overload protection, up to 500% of FS. They have ±0.03% linearity and a 3 mv/V output in capacities from 25 to 750 lbf.

The LCM412-IS metric series are FM rated intrinsically safe. They have ±0.1% linearity and a 4 to 20 mA output in capacities from 25 kgf to 7,500 kgf.

The LC704 series of tension load cells are ideal for crane cables, support rods, and engine test beds, etc. They are available in capacities from 10,000 to 200,000 lbf.

The LCM105 metric series are made from aluminum to be both lightweight and durable. They have ±0.03% linearity and a 3 mv/V output in capacities from 10 to 100 kgf.