NEMA-6 Side Mount Liquid Level Switches
NEMA-6 Side Mounted Liquid Level Switches For High, Low, or Intermediate Level Sensing
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- NEMA-6 (IP68) Rated
- User Selectable, Normally Open or Normally Closed
- Mounts Horizontally
LVN-90 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Max Operating Pressure
Max Process Temperature
Wetted Materials
Media Type
Process Connection Type
Process Connection Size
Switch Rating and Type
Features
- Enclosure Rating NEMA-6 Rated
- Form Factor Mounts Horizontally
- Maximum Ambient Temperature 149 {C} (300 {F})
- Minimum Ambient Temperature -40 {C} (-40 {F})
- Switch Operation Approximately 1/2 the float travel in liquid of 1.0 specific gravity
- Switch type SPST
These liquid level switches are sealed with potting compound. The only path for liquid to the electrical switch would be through the wires. If the wires are terminated in an appropriate manner (eg. –NEMA-6 connectors), the level switch will meet or exceed a NEMA-6 rating, making them suitable for submersion with years of worry free operation in moisture-laden environments. A sealed SPST switch provides consistent accuracy and high repeatability with the effects of shock, vacuum or vibration minimized. The switch is extremely versatile since it is user selectable as a normally open or normally closed by simply reversing the float or the mounting of the switch. The standard 1/2" NPT male fittings allow for quick installation in either the top or bottom of the tank or vessel.
Rated 2 out of
5
by
DJM72 from
Poor wire insulation
Purchased 2 a couple years ago, and installed into a hot, dry environment (but still well within specs). After about 6 months, the wire insulation became cracked and brittle, and easily fell away from the copper
Date published: 2019-05-11
RoHS 2015/863 - View Certificate
CE Approved
UKCA
UL cULus Recognized
OK, I get 50VA, but what are the voltage and current limits? Can I switch 100,000 volts at 1/2 milliamp, or 1,000 amps at 50 millivolts?
Thank you for your inquiry. Please e-mail flow@omega.com and our Flow Engineers can send you the electrical ratings.
Date published: 2022-08-30
CE compliance is listed on the web site for this switch (LVN-92), but not on the data sheet. How can I get a CE declaration of conformity?
Thank you for your inquiry! Please email us at flow@omega.com so that we can provide the necessary documentation regarding CE conformity
Date published: 2022-03-03
