Vacuum & Pressure BSPT Feedthroughs for Sealing Metric Temperature Probes
Metric Multiconductor Feedthroughs
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $273.22 |
| 10-49 | $248.63 |
| 50-99 | $234.97 |
| 100-999 | $224.04 |
| 1000-4999 | $210.38 |
| 5000+ | $196.72 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Pressure or Vacuum Applications
- Seals Multiple Thermocouples and Protection Tubes
- Available in Both NPT and ISO T/BPST Mounting Threads
- Up to 16 Probes in 1 Fitting
- Blank Sealing Plugs Included
- 3 to 16 Probes
- 416 SS Body and Cap
- 316 SS Ferrules Standard
- PTFE Ferrules Available
- OMEGALOKR Ferrules Standard
- 1 to 6 mm (0.040 to 1.4") Probe Diameters
MFT-M10-12 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Number of Probes
Probe Diameter
Fitting Type
Ferrule Material
Cap Type
These all-new multiconductor feedthroughs are designed for applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy-duty 416 SS construction allows use of this fitting in high-pressure or vacuum applications. Probes between 0.040" and 1/4" in diameter can be used in these feedthroughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 for 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter, and 16 for 0.040" diameter probes.
All multiconductor feedthroughs come standard with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If the probes have to be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, which allows the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK compression fittings.
All multiconductor feedthroughs come standard with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If the probes have to be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, which allows the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK compression fittings.
What's the maximum allowable pressure for a MFT-M10-5 feedthrough @ 752°F?
PRESSURE RATING ON THE MFT
MULTICONDUCTOR FEEDTHROUGH IS
5,000 PSI USING 316 SS FERRULES ONLY.
THREADS ARE FINE THREADS.
Note; Fitting is designed to be mounted on the ambient condition side of chamber. Cap and ferrules will not be inside high temperature environment.
Date published: 2020-06-26
