Modular Signal Conditioner Data Acquisition Systems
Modular Signal Conditioning System Accepts a Wide Range of Inputs
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $137.14 |
| 5-9 | $130.28 |
| 10-24 | $127.54 |
| 25-49 | $122.05 |
| 50-99 | $119.31 |
| 100+ | $116.57 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Isolated Signal Conditioners for a Wide Range of Process Control Signals: Thermocouples, RTDs, mA, mV, V
- Best Replacement/Upgrade Model for 7B Devices
- Process Current (4-20 and 0-20 mA) Output Module
- Powered mA Input Module Includes Isolated +24 Vdc Power for a Remote Transmitter
- Bipolar Voltage Input and Output Modules
- Operates From a Single +24 Vdc Power Supply
- Provides 1-5 V, 0-10 V, and±10 V Output Options
- ±0.1% Max. Accuracy, FactoryCalibrated
- 1500 V rms of CMV Isolation and 120 V rms Field Wiring Protection
- Compact, 54 x 42 x 14 mm (2.1" x 1.7" x 0.6" ) Plastic Housing
OM7-37-K-22-1-C Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Input Type
Input Class
Input Ranges
Output Type
Programability
Output Class
Display Type
Isolation
As the best replacement/upgrade version for 7B Modles, the OM7 Series modular isolation-based, single channel plug-in signal conditioning system accepts inputs from a wide range of process control transducers and signals while providing high-level output voltages. Featuring a maximum nonlinearity of 0.02% and factory calibrated to guarantee maximum accuracy of ±0.1%, the OM7 Series offers superior performance at a lower cost than multipurpose signal conditioners. The modules provide 1500 V rms isolation and 120 V rms of field wiring input protection. The power supplies necessary to drive each individual module’s input circuitry are internally isolated, enabling the OM7 modules to offer true channel-to-channel isolation of the input signals. The modules are rated for a nominal power supply input of +24 Vdc and, for maximum flexibility, will accept supply voltages in the +14 Vdc to +35 Vdc range.
All modules are packaged in a compact 54 x 42 x 14 mm (2.1" x 1.7" x 0.6") durable plastic case that readily accommodates high channel density applications. Each module may be operated in high humidity (noncondensing) environments and is rated over the extended -40 to 85°C industrial temperature range. All modules feature a simple pinout that allows them to be mixed and matched within a single backplane design. Furthermore, modules are easily serviced since they can be removed and inserted into the backplane with power applied.
Modules are available to isolate and condition the following input signals and transducers: voltage, process current, RTD, 2-wire transmitter, and thermocouples. The 2-wire transmitter interface module (OM7-35) accepts a 4-20 mA process input and provides an isolated +24 Vdc supply to power the current loop. In this way, a loop-powered transmitter can be directly connected to the OM7-35 without requiring a separate power supply. All of the isolated input modules, with the exception of the OM7-21, provide a high-level output voltage that is factory configured for either the 1-5 V or 0-10 V range. The OM7-21 is a unity gain, isolated input module with an input/output range of ±10 V.
Modules are also available that provide isolated output signals for process current and bipolar voltage. The OM7-39 process current module converts either a 1-5 V signal to a 4-20 mA output or a 0-10 V input to a 0-20 mA output. The input/output ranges of the OM7-39 are factory configured. The OM7-22 is a unity gain module that provides an isolated ±10 V output signal.
A full line of backplanes and rack-mount hardware complete the OM7 Series signal conditioning system. Each backplane contains screw terminals for field wiring connections and a miniature cold junction compensation (CJC) thermistor that is installed under the terminal blocks of each channel. Due to the pinout of the OM7 Series modules, the CJC thermistor affects only the thermocouple modules. This flexibility permits any module type to be used in any channel on the backplane.
ISOLATED VOLTAGE AND CURRENT INPUT
The OM7 Series feature five isolated voltage/current input modules capable of addressing a wide variety of input voltage ranges and signal dynamics. The OM7-21 is a bipolar unit module featuring a full-scale range of ±10 V. The OM7-30 and OM7-31 accept dc input voltages and provide either a factory configured 1-5 V or 0-10 V output signal. The OM7-32 accepts a 4-20 mA process current input signal and provides an output voltage signal in the 1-5 V range. The OM7-33 isolates a 1-5 V input signal and provides a buffered 1-5 V output signal. The OM7-32 and OM7-33 can also be factory configured to provide a 0-10 V output signal with a 0-20 mA or 0-5 V input, respectively. Both the OM7-32 and OM7-33 have bandwidths of 100 Hz. The OM7- 30 and OM7-31 are limited to 3 Hz bandwidth.
ISOLATED THERMOCOUPLE INPUT
The OM7-37 and OM7-47 modules accept inputs from types J, K, T, E, R, S, and B thermocouples and provide a 1-5 V or 0-10 V output signal. The OM7-47 also accepts inputs from type N thermocouples. Both the OM7-37 and OM7-47 have a nominal 3 dB bandwidth of 3 Hz, and they provide for upscale open input detection within 10 sec.
In addition to the signal conditioning capabilities of the OM7-37, the OM7-47 includes an internal linearization circuit that compensates for the inherent nonlinearities of the thermocouple. With this linearizer, the OM7-47 is able to provide an output voltage that is linear with respect to the actual temperatures being measured by the thermocouple.
The thermocouple input modules accomplish CJC by means of an external thermistor mounted under the field wiring screw terminal blocks of the backplane.
ISOLATED LINEARIZED RTD INPUT
The OM7-34 module accepts inputs from 100. platinum and 120. nickel RTDs and produce an output voltage signal that is proportional with temperature measured by the RTD. The OM7-34 modules are available in a factory-configured 1-5 V or 0-10 V output range. Three-wire lead resistance compensation is provided and 2- or 3-wire RTDs may be used. The OM7-34 RTD input module has a nominal 3 dB bandwidth of 3 Hz and upscale open RTD detection with 10 sec.
ISOLATED 2-WIRE TRANSMITTER INTERFACE
The OM7-35 input module accepts a 4-20 mA process current input, provides a standard 1-5 V output signal, and features an isolated loop power supply for driving the current transmitter. The module has a nominal 3 dB bandwidth of 100 Hz and offers downscale open input detection within 2 sec.
The isolated transmitter loop power supply of the OM7-35 is unregulated and will provide a voltage that is proportional to the voltage used to power the OM7-35 module. The voltage provided by the OM7-35 is between 13 V and 34 V for loop current between 4 mA and 20 mA and supply voltages between 20.4 and 26.4 V. (For nominal +24 V supply, the OM7-35 will supply approximately +24 V to the loop.)
ISOLATED CURRENT OUTPUT
The OM7-39 isolated output module accepts either a factory-configured 1-5 V or 0-10V input signal and provides an isolated 4-20 mA or 0-20 mA output current signal. The module can drive a wide range of resistive loads, depending upon +Vs, the supply voltage. At a nominal +Vs of +24 V, the OM7-39 will drive up to 850..
ISOLATED BIPOLAR VOLTAGE OUTPUT
The OM7-22 is a unity-gain module with an input/output range of ±10 V. The OM7-22 has an input range of ±10 V and provides an isolated bipolar ±10 V output signal to the field. The OM7-22 features 1500 V rms of CMV isolation, 100 dB minimum of common mode rejection, and a 400 Hz bandwidth.
OM7 Specifications:
OM7 Common Input Module Specifications Common Mode Voltage: 1500 V rms continuous
Input Protection: 120 V rms continuous
Output Protection: Short to ground
Output Resistance: <1 ohm Common to All Modules
Operating Range: -40 to 85°C (-40 to 185°F)
Storage Range: -40 to 85°C (-40 to 185°F)
Humidity (24 hr): 90% non-condensing
WEIGHT: 60 G (0.2 OZ)
OM7 Series Input Module Specifications (typical @23°C and + 24 Vdc)
* T/C is thermocouple
Output Module Specifications
*Load resistance of OM7-39 dependent on power supply
OM7-34 Linearized RTD Input Module (@ +23°C ±5°C and Vs = +24Vdc)
NOTES:
The X in the OM7-34 model number designations in the above table is used to identify the output voltage range option. If X=1, then the OM7-34 is factory configured for a 1-5 V output; and if X=2, then the OM7-34 is factory configured for a 0-10 V output. The Standard Range OM7-34s (i.e., OM7-34-01, OM7-34-02, OM7-34-03, OM7-34-04) are configured for a Platinum RTD with the DIN standard alpha of 0.00385. The OM7-34-N Series is configured for Nickel RTDs.
OM7-34 Linearized RTD Input Module (@ +23°C ±5°C and Vs = +24Vdc)
1) The CJC sensor accuracy should be added to the module accuracy listed in this table in order to compute the overall measurement accuracy.
2) Accuracy includes the effects of repeatability, hysteresis, and conformity.
Millivolt Input - Unipolar
Millivolt Input - Bipolar
Voltage Input - Unipolar
Voltage Input - Bipolar
Process Voltage Inputs
Process Current Inputs
Linearized Thermocouple
RTD Inputs (Linearized 100. Pt 2-Wire or 3-Wire, Alpha = 0.00385)
RTD Inputs (Linearized 120 . Ni 2-Wire or 3-Wire)
Non-Linearized Thermocouple
2-Wire Transmitter Inputs with Loop Power (with Sense Resistor)
Output Modules
Backplanes
Cables
Accessories
All modules are packaged in a compact 54 x 42 x 14 mm (2.1" x 1.7" x 0.6") durable plastic case that readily accommodates high channel density applications. Each module may be operated in high humidity (noncondensing) environments and is rated over the extended -40 to 85°C industrial temperature range. All modules feature a simple pinout that allows them to be mixed and matched within a single backplane design. Furthermore, modules are easily serviced since they can be removed and inserted into the backplane with power applied.
Modules are available to isolate and condition the following input signals and transducers: voltage, process current, RTD, 2-wire transmitter, and thermocouples. The 2-wire transmitter interface module (OM7-35) accepts a 4-20 mA process input and provides an isolated +24 Vdc supply to power the current loop. In this way, a loop-powered transmitter can be directly connected to the OM7-35 without requiring a separate power supply. All of the isolated input modules, with the exception of the OM7-21, provide a high-level output voltage that is factory configured for either the 1-5 V or 0-10 V range. The OM7-21 is a unity gain, isolated input module with an input/output range of ±10 V.
Modules are also available that provide isolated output signals for process current and bipolar voltage. The OM7-39 process current module converts either a 1-5 V signal to a 4-20 mA output or a 0-10 V input to a 0-20 mA output. The input/output ranges of the OM7-39 are factory configured. The OM7-22 is a unity gain module that provides an isolated ±10 V output signal.
A full line of backplanes and rack-mount hardware complete the OM7 Series signal conditioning system. Each backplane contains screw terminals for field wiring connections and a miniature cold junction compensation (CJC) thermistor that is installed under the terminal blocks of each channel. Due to the pinout of the OM7 Series modules, the CJC thermistor affects only the thermocouple modules. This flexibility permits any module type to be used in any channel on the backplane.
ISOLATED VOLTAGE AND CURRENT INPUT
The OM7 Series feature five isolated voltage/current input modules capable of addressing a wide variety of input voltage ranges and signal dynamics. The OM7-21 is a bipolar unit module featuring a full-scale range of ±10 V. The OM7-30 and OM7-31 accept dc input voltages and provide either a factory configured 1-5 V or 0-10 V output signal. The OM7-32 accepts a 4-20 mA process current input signal and provides an output voltage signal in the 1-5 V range. The OM7-33 isolates a 1-5 V input signal and provides a buffered 1-5 V output signal. The OM7-32 and OM7-33 can also be factory configured to provide a 0-10 V output signal with a 0-20 mA or 0-5 V input, respectively. Both the OM7-32 and OM7-33 have bandwidths of 100 Hz. The OM7- 30 and OM7-31 are limited to 3 Hz bandwidth.
ISOLATED THERMOCOUPLE INPUT
The OM7-37 and OM7-47 modules accept inputs from types J, K, T, E, R, S, and B thermocouples and provide a 1-5 V or 0-10 V output signal. The OM7-47 also accepts inputs from type N thermocouples. Both the OM7-37 and OM7-47 have a nominal 3 dB bandwidth of 3 Hz, and they provide for upscale open input detection within 10 sec.
In addition to the signal conditioning capabilities of the OM7-37, the OM7-47 includes an internal linearization circuit that compensates for the inherent nonlinearities of the thermocouple. With this linearizer, the OM7-47 is able to provide an output voltage that is linear with respect to the actual temperatures being measured by the thermocouple.
The thermocouple input modules accomplish CJC by means of an external thermistor mounted under the field wiring screw terminal blocks of the backplane.
ISOLATED LINEARIZED RTD INPUT
The OM7-34 module accepts inputs from 100. platinum and 120. nickel RTDs and produce an output voltage signal that is proportional with temperature measured by the RTD. The OM7-34 modules are available in a factory-configured 1-5 V or 0-10 V output range. Three-wire lead resistance compensation is provided and 2- or 3-wire RTDs may be used. The OM7-34 RTD input module has a nominal 3 dB bandwidth of 3 Hz and upscale open RTD detection with 10 sec.
ISOLATED 2-WIRE TRANSMITTER INTERFACE
The OM7-35 input module accepts a 4-20 mA process current input, provides a standard 1-5 V output signal, and features an isolated loop power supply for driving the current transmitter. The module has a nominal 3 dB bandwidth of 100 Hz and offers downscale open input detection within 2 sec.
The isolated transmitter loop power supply of the OM7-35 is unregulated and will provide a voltage that is proportional to the voltage used to power the OM7-35 module. The voltage provided by the OM7-35 is between 13 V and 34 V for loop current between 4 mA and 20 mA and supply voltages between 20.4 and 26.4 V. (For nominal +24 V supply, the OM7-35 will supply approximately +24 V to the loop.)
ISOLATED CURRENT OUTPUT
The OM7-39 isolated output module accepts either a factory-configured 1-5 V or 0-10V input signal and provides an isolated 4-20 mA or 0-20 mA output current signal. The module can drive a wide range of resistive loads, depending upon +Vs, the supply voltage. At a nominal +Vs of +24 V, the OM7-39 will drive up to 850..
ISOLATED BIPOLAR VOLTAGE OUTPUT
The OM7-22 is a unity-gain module with an input/output range of ±10 V. The OM7-22 has an input range of ±10 V and provides an isolated bipolar ±10 V output signal to the field. The OM7-22 features 1500 V rms of CMV isolation, 100 dB minimum of common mode rejection, and a 400 Hz bandwidth.
OM7 Specifications:
OM7 Common Input Module Specifications Common Mode Voltage: 1500 V rms continuous
Input Protection: 120 V rms continuous
Output Protection: Short to ground
Output Resistance: <1 ohm Common to All Modules
Operating Range: -40 to 85°C (-40 to 185°F)
Storage Range: -40 to 85°C (-40 to 185°F)
Humidity (24 hr): 90% non-condensing
WEIGHT: 60 G (0.2 OZ)
OM7 Series Input Module Specifications (typical @23°C and + 24 Vdc)
| Model | OM7-21 | OM7-30 | OM7-31 | OM7-32 | OM7-33 | OM7-34 | OM7-35 | OM7-37 | OM7-47 |
| Input Type | ±10 V | ±1 mV to ±1V | ±1 V to ±10 V | 4-20 mA 0-20 mA | 1-5 V 0-5 V | RTD | 4-20 mA | T/C* | T/C* |
| Output Range into 2 kΩ min load) | ±10 V | 1-5 or 0-10 V | 1-5 or 0-10 V | 1-5 or 0-10 V | 1-5 or 0-10 V | 1-5 or 0-10 V | 1-5 or 2-10 V | 1-5 or 0-10 V | 1-5 or 0-10 V |
| Accuracy | ±0.1% span max | ±0.1% span max | ±0.1% span max | ±0.1% span max | ±0.1% span max | See table | ±0.1% span max | ±0.1% span max | See table |
| Nonlinearity | ±0.02% span max | ±0.02% span max | ±0.02% span max | ±0.02% span max | ±0.02% span max | See table | ±0.02% span max | 0.02% span max | N/A |
| Input Resistance | 2 MΩ | 10 MΩ | 100 kΩ | 200 Ω | 2 MΩ | N/A | N/A | 10 MΩ | 10 MΩ |
| Input Bias Current | 3 nA | 1 nA | 0.2 nA | N/A | 0.1 nA | N/A | N/A | 25 nA | 25 nA |
| Nominal 3 db Bandwidth | 300 Hz | 3 Hz | 3 Hz | 100 Hz | 100 Hz | 3 Hz | 100 Hz | 3 Hz | 3 Hz |
| Response Time, 0-90% | 1 msec | 150 msec | 150 msec | 10 msec | 10 msec | 250 msec | 5 msec | 150 msec | 150 msec |
| CJC Accuracy, Ambient Temp. +5 to 45°C | NA | NA | NA | NA | NA | NA | NA | ±1.0°C max. | ±1.0°C max. |
| Supply Voltage | 19-29 VDC | 14-35 VDC | 14-35 VDC | 14-35 VDC | 14-35 VDC | 14-35 VDC | 18-35 | 14-35 VDC | 14-35 VDC |
| Supply Current | 35 mA | 25 mA | 25 mA | 20 mA | 20 mA | 25 mA | 60 mA | 25 mA | 25 mA |
Output Module Specifications
| Model | OM7-22 | OM7-39 |
| Output Range | ±10 V | 0-20 mA 4-20 mA |
| Input Range | ±10 V | 0-10 V 1-5 V |
| Accuracy | ±0.1% Span | ±0.1% Span |
| Nonlinearity | ±0.02% Span | ±0.02% Span |
| Output Offset | 0.001% Span/ | 0.0035% Span/C |
| Max. Output | ±14 Vdc | 30 Ma |
| Load Resistance* | 5 K.m min. | 0-850. |
| Nominal 3 db Bandwidth | 400 Hz | 100 Hz |
| Response Time, 0-90% | 1 ms | 3 ms |
| Common Mode Voltage | 1500 V rms | 1500 V rms |
| Supply Voltage | 19-29 Vdc | 14-35 Vdc |
| Supply Current | 20 mA max | 60 mA max |
OM7-34 Linearized RTD Input Module (@ +23°C ±5°C and Vs = +24Vdc)
| Model | Input Range | Accuracy | Nonlinearity |
| OM7-34-01-X-C | -100 to +100°C | ±0.15% | ±0.05% |
| OM7-34-02-X-C | 0 to +100°C | ±0.2% | ±0.05% |
| OM7-34-03-X-C | 0 to +200°C | ±0.15% | ±0.05% |
| OM7-34-04-X-C | 0 to +600°C | ±0.1% | ±0.05% |
| OM7-34-N-01-X-C | 0 to +300°C | ±0.3% | ±0.012% |
| OM7-34-N-02-X-C | 0 to +200°C | ±0.3% | ±0.14% |
The X in the OM7-34 model number designations in the above table is used to identify the output voltage range option. If X=1, then the OM7-34 is factory configured for a 1-5 V output; and if X=2, then the OM7-34 is factory configured for a 0-10 V output. The Standard Range OM7-34s (i.e., OM7-34-01, OM7-34-02, OM7-34-03, OM7-34-04) are configured for a Platinum RTD with the DIN standard alpha of 0.00385. The OM7-34-N Series is configured for Nickel RTDs.
OM7-34 Linearized RTD Input Module (@ +23°C ±5°C and Vs = +24Vdc)
| Model | Input Range | Accuracy1,2 (typical) | Accuracy1 (max) |
| OM7-47-J-01-1-C | 0 to +760°C | 0.15% span | 0.38% span |
| OM7-47-J-01-2-C | 0 to +760°C | 0.13% span | 0.32% span |
| OM7-47-J-02-1-C | -100 to +300°C | 0.16% span | 0.35% span |
| OM7-47-J-02-2-C | -100 to +300°C | 0.14% span | 0.30% span |
| OM7-47-K-03-1-C | 0 to +1300°C | 0.15% span | 0.35% span |
| OM7-47-K-03-2-C | 0 to +1300°C | 0.15% span | 0.32% span |
| OM7-47-K-04-1-C | 0 to +600°C | 0.09% span | 0.20% span |
| OM7-47-K-04-2-C | 0 to +600°C | 0.08% span | 0.18% span |
| OM7-47-T-05-1-C | 0 to +400°C | 0.24% span | 0.50% span |
| OM7-47-T-05-2-C | 0 to +400°C | 0.19% span | 0.38% span |
| OM7-47-T-06-1-C | -100 to +200°C | 0.29% span | 0.57% span |
| OM7-47-T-06-2-C | -100 to +200°C | 0.25% span | 0.47% span |
| OM7-47-E-07-1-C | 0 to +900°C | 0.18% span | 0.41% span |
| OM7-47-E-07-2-C | 0 to +900°C | 0.15% span | 0.34% span |
| OM7-47-R-08-1-C | +500 to +1750°C | 0.15% span | 0.36% span |
| OM7-47-R-08-2-C | +500 to +1750°C | 0.13% span | 0.30% span |
| OM7-47-S-09-1-C | +700 to +1750°C | 0.13% span | 0.31% span |
| OM7-47-S-09-2-C | +700 to +1750°C | 0.11% span | 0.25% span |
| OM7-47-B-10-1-C | +800 to +1800°C | 0.19% span | 0.41% span |
| OM7-47-B-10-2-C | +800 to +1800°C | 0.17% span | 0.35% span |
| OM7-47-N-11-1-C | +200 to +1300°C | 0.14% span | 0.31% span |
| OM7-47-N-11-2-C | +200 to +1300°C | 0.09% span | 0.27% span |
2) Accuracy includes the effects of repeatability, hysteresis, and conformity.
Millivolt Input - Unipolar
| Model No. | Input Range | Output Range |
| OM7-30-01-1-C | 0-10 mV | 1-5 V |
| OM7-30-01-2-C | 0-10 mV | 0-10 V |
| OM7-30-02-1-C | 0-100 mV | 1-5 V |
| OM7-30-02-2-C | 0-100 mV | 0-10 V |
Millivolt Input - Bipolar
| Model No. | Input Range | Output Range |
| OM7-30-06-1-C | ±10 mV | 1-5 V |
| OM7-30-06-2-C | ±10 mV | 0-10 V |
| OM7-30-07-1-C | ±100 mV | 1-5 V |
| OM7-30-07-2-C | ±100 mV | 0-10 V |
Voltage Input - Unipolar
| Model No. | Input Range | Output Range |
| OM7-30-03-1-C | 0-1 V | 1- 5 V |
| OM7-30-03-2-C | 0-1 V | 0-10 V |
| OM7-31-04-1-C | 0-5 V | 1-5 V |
| OM7-31-04-2-C | 0-5 V | 0-l0 V |
| OM7-30-05-1-C | 1-5 V | 1-5 V |
| OM7-30-05-2-C | 1-5 V | 0-10 V |
| OM7-31-01-1-C | 0-10 V | 1-5 V |
| OM7-31-01-2-C | 0-10 V | 0-10 V |
Voltage Input - Bipolar
| Model No. | Input Range | Output Range |
| OM7-30-08-1-C | ±1 V | 1-5 V |
| OM7-30-08-2-C | ±1 V | 0-10 V |
| OM7-31-02-1-C | ±5 V | 1-5 V |
| OM7-31-02-2-C | ±5 V | 0-10 V |
| OM7-31-03-1-C | ±10 V | 1-5 V |
| OM7-31-03-2-C | ±10 V | 0-10 V |
| OM7-21-C | ±10 V | ±10 V |
Process Voltage Inputs
| Model No. | Input Range | Output Range |
| OM7-33-01-1-C | 1-5 V | 1-5 V |
| OM7-33-01-2-C | 1-5 V | 0-10V |
| OM7-33-02-1-C | 0-5 V | 1-5 V |
| OM7-33-02-2-C | 0-5 V | 0-10 V |
Process Current Inputs
| Model No. | Input Range | Output Range |
| OM7-32-01-1-C | 4-20 mA | 1-5 V |
| OM7-32-01-2-C | 4-20 mA | 0-10 V |
| OM7-32-02-1-C | 0-20 mA | 1-5V |
| OM7-32-02-2-C | 0-20 mA | 0-10V |
Linearized Thermocouple
| Model No. | Input Range | Output Range | Thermocouple Type |
| OM7-47-J-01-1-C | 0 to +760°C | 1-5 V | J |
| OM7-47-J-01-2-C | 0 to +760°C | 0-10 V | J |
| OM7-47-J-02-1-C | -100 to +300°C | 1-5 V | J |
| OM7-47-J-02-2-C | -100 to +300°C | 0-10 V | J |
| OM7-47-K-03-1-C | 0 to +1300°C | 1-5 V | K |
| OM7-47-K-03-2-C | 0 to +1300°C | 0-10 V | K |
| OM7-47-K-04-1-C | 0 to +600°C | 1-5 V | K |
| OM7-47-K-04-2-C | 0 to +600°C | 0-10 V | K |
| OM7-47-T-05-1-C | 0 to +400°C | 1-5 V | T |
| OM7-47-T-05-2-C | 0 to +400°C | 0-10 V | T |
| OM7-47-T-06-1-C | -100 to +200°C | 1-5 V | T |
| OM7-47-T-06-2-C | -100 to +200°C | 0-10 V | T |
| OM7-47-E-07-1-C | 0 to +900°C | 1-5 V | E |
| OM7-47-E-07-2-C | 0 to +900°C | 0-10 V | E |
| OM7-47-R-08-1-C | +500 to +1750°C | 1-5 V | R |
| OM7-47-R-08-2-C | +500 to +1750°C | 0-10 V | R |
| OM7-47-S-09-1-C | +700 to +1750°C | 1-5 V | S |
| OM7-47-S-09-2-C | +700 to +1750°C | 0-10 V | S |
| OM7-47-B-10-1-C | +800 to +1800°C | 1-5 V | B |
| OM7-47-B-10-2-C | +800 to +1800°C | 0-10 V | B |
| OM7-47-N-11-1-C | +200 to +1300°C | 1-5 V | N |
| OM7-47-N-11-2-C | +200 to +1300°C | 0-10 V | N |
RTD Inputs (Linearized 100. Pt 2-Wire or 3-Wire, Alpha = 0.00385)
| Model No. | Input Range | Output Range |
| OM7-34-01-1-C | -100 to +100°C | 1-5 V |
| OM7-34-01-2-C | -100 to +100°C | 0-10 V |
| OM7-34-02-1-C | 0 to +100°C | 1-5 V |
| OM7-34-02-2-C | 0 to +100°C | 0-10 V |
| OM7-34-03 -1-C | 0 to + 200°C | 1-5 V |
| OM7-34-03-2-C | 0 to +200°C | 0- 10 V |
| OM7-34-04-1-C | 0 to +600°C | 1-5 V |
| OM7-34-04-2-C | 0 to +600°C | 0- 10 V |
| OM7-34-05-1-C | -50 to +350°C | 1-5 V |
| OM7-34-05-2-C | -50 to +350°C | 0-10 V |
RTD Inputs (Linearized 120 . Ni 2-Wire or 3-Wire)
| Model No. | Input Range | Output Range |
| OM7-34-N-01-1-C | 0 to +300°C | 1-5 V |
| OM7-34-N-01-2-C | 0 to +300°C | 0-10 V |
| OM7-34-N-02-1-C | 0 to +200°C | 1-5 V |
| OM7-34-N-02-2-C | 0 to +200°C | 0-10 V |
Non-Linearized Thermocouple
| Model No. | Input Range | Output Range | Thermocouple Type |
| OM7-37-J-01- 1-C | -100 to +760°C | 1-5 V | J |
| OM7-37-J-01-2-C | -100 to +760°C | 0-10 V | J |
| OM7-37-J-10-1-C | 0 to +200°C | 1-5 V | J |
| OM7-37-J-10-2-C | 0 to +200°C | 0-10 V | J |
| OM7-37-J-11-1-C | 0 to +400°C | 1- 5 V | J |
| OM7-37-J-11-2-C | 0 to +400°C | 0-10 V | J |
| OM7-37-J-12-1-C | 0 to +600°C | 1-5 V | J |
| OM7-37-J-12-2-C | 0 to +600°C | 0-10 V | J |
| OM7-37-J- 13-1-C | +300 to +600°C | 1-5 V | J |
| OM7-37-J-13-2-C | +300 to +600°C | 0-10 V | J |
| OM7-37-K-02-1-C | -100 to +1350°C | 1-5 V | K |
| OM7-37-K-02-2-C | -100 to +1350°C | 0-10 V | K |
| OM7-37-K-20-1-C | 0 to +300°C | 1-5 V | K |
| OM7-37-K-20-2-C | 0 to +300°C | 0-10 V | K |
| OM7-37-K-21-1-C | 0 to +600°C | 1-5 V | K |
| OM7-37-K-21-2-C | 0 to +600°C | 0-10 V | K |
| OM7-37-K-22-1-C | 0 to +1200°C | 1-5 V | K |
| OM7-37-K-22-2-C | 0 to +1200°C | 0-10 V | K |
| OM7-37-K-23-1-C | +600 to +1200°C | 1-5 V | K |
| OM7-37-K-23-2-C | +600 to +1200°C | 0-10 V | K |
| OM7-37-T-03-1-C | -100 to +400°C | 1-5 V | T |
| OM7-37-T-03-2-C | -100 to +400°C | 0-10 V | T |
| OM7-37-E-04-1-C | 0 to +900°C | 1- 5 V | E |
| OM7-37-E-04-2-C | 0 to +900°C | 0-10 V | E |
| OM7-37-R-05-1-C | 0 to +1750°C | 1-5 V | R |
| OM7-37-R-05-2-C | 0 to +1750°C | 0-10 V | R |
| OM7-37-S-06-1-C | 0 to +1750°C | 1-5 V | S |
| OM7-37-S-06-2-C | 0 to +1750°C | 0-10 V | S |
| OM7-37-B-07-1-C | 0 to +1800°C | 1-5 V | B |
| OM7-37-B-07-2-C | 0 to +1800°C | 0-10 V | B |
2-Wire Transmitter Inputs with Loop Power (with Sense Resistor)
| Model No. | Input Range | Output Range |
| OM7-35-01-1-C | 4-20 mA | 1 -5 V |
| OM7-35-01-2-C | 4-20 mA | 0-10 V |
Output Modules
| Model No. | Input Range | Output Range |
| OM7-22-C | ±10 V | ±10 V |
| OM7-39-01-C | 1-5 V | 4-20 mA |
| OM7-39-02-C | 0-10 V | 0-20 mA |
Backplanes
| Model No. | Description |
| OM7-BP-1-C | 1 Channel backplane |
| OM7-BP-1-DIN-C | 1 Channel backplane DIN Rail |
| OM7-BP-2-C | 2 Channel backplane |
| OM7-BP-2-DIN-C | 2 Channel backplane DIN Rail |
| OM7-BP-4-C | 4 Channel backplane |
| OM7-BP-4-DIN-C | 4 Channel backplane DIN Rail |
| OM7-BP-8-C | 8 Channel backplane |
| OM7-BP-8-DIN-C | 8 Channel backplane DIN Rail |
| OM7-BP-16-C | 16 Channel backplane |
| OM7-BP-16-DIN- | 16 Channel backplane DIN Rail |
| RAIL-35-2 | 35mm Din Rail, 2 Meter Length |
Cables
| Model No. | Description |
| OM7-CA-01 | 6" cable (25-pin, D-type connector to 26-pin male header connector) converts OM7 backplane connector to an OM5 backplane connector pin out |
| OM7-CA-02 | 3-foot cable (25 pin, D-type connector on both ends) |
Accessories
| Model No. | Description |
| U24Y175 | Power supply (105-125/210-250 VAC input, 24 VDC @ 175 mA output |
| OM7-PROTO | OM7 Breadboard kit |
| OM7-BP-EV | 1 Channel evaluation |
| OM7-IF | Universal interface board |
| OM7-RK002 | 19” rack for mounting backplane |
| OM7-RI | 250ohm current conversion resistor |
| OM7-DIN-SF | DIN Base element with snap foot |
| OM7-DIN-WSF | DIN Side element without snap foot |
| OM7-DIN-SE | DIN Side elements |
| OM7-DIN-CP | DIN Connector pins |
RoHS 2015/863 - View Certificate
CE Approved
UKCA
Hello, For Modular Signal Conditioning System # OM7-30-02-1-C, signals conditioners are include? ( for bridge, strain 100 mV)
We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2021-06-21
Specifically what items are included in (1) OM7-30-02-1-C system? Is everything I need included? Will I be able to use it immediately after I receive it?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM”
Date published: 2021-12-09
Accessories
