Closed Loop Controller For AC or DC Adjustable Speed Drives
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Connects to Speedpot Input of AC and DC Motor Drives
- Adjustable Min/Max and Accel/Decel Speeds
- Pulse Input Capacity of 50,000 PPM, 833 Hz
- Display Programmable for All Engineering Units
- NEMA 4X Rated Faceplate
- Universal Power Supply: 85 to 265 Vac
- Programmable Alarm Output
- Multiple Operational Modes: Rate, Time, Follower
- Output is 0-2 to 0-24 VDC
| Sample Application: A pump control which displays liters per minute with an alarm to warn operator of low or stopped flow |
The OMDC-ASP10 is simple to operate… just set the desired RPM, rate, or time in the large ½' LED display by depressing the 'up-down' pushbuttons, one digit at a time or fast sweep. The OMDC-ASP10 settings are exact and repeatable. It will precisely control speed to a remarkable ±½ RPM of set speed, long term. The panel mount unit is easy to install into a standard 1⁄8 DIN cutout. All wiring connects directly to a rugged screw type terminal strip through the easy access rear panel.
SPECIFICATIONS
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50 to 60 Hz
Transducer Signal Input: 0-5 to 0-24 Vdc
On-Board Power Supply: 5 Vdc, 50 mA for external sensors
Cutout: 92 W x 45 mm H (3.62 x 1.77')
Dimensions: 115 W x 58 H x 117 mm D (4.54 x 2.29 x 4.63')
Stack Lights, Indicating Lights, Signal Lights with Steady, Flashing & Strobe Light Modules with NEMA 4/4x/13 & IP65 Rating
$116.96
0 In Stock
