Geartooth Pickup Speed Sensor
Square wave output
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $205.36 |
| 10-24 | $195.09 |
| 25-49 | $190.98 |
| 50-99 | $182.77 |
| 100-199 | $178.66 |
| 200+ | $174.56 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Senses Motion of Ferrous Gear Type Targets
- Zero Speed Sensing Capabilities
- Digital Output Signal (Square Wave)
- Large Operational Air Gap
- No Additional Conditioning Electronics Needed
- Immune to Hostile Environments
- Operates from 4.5 to 24 Vdc
- Not Subject to Rotational Orientation
OMDC-MPU-A Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Output
Features
The OMDC-MPU-A geartooth pick-up provides speed sensing capabilities using an integrated hall-effect sensor in conjunction with a permanent magnet which supplies a bias field. This ready-to-use pick-up directly senses rotating ferrous gear and other similar gear-type targets. The OMDC-MPU-A Series is capable of sensing various target tooth sizes over wide ranges of airgap. The operational airgap achieved is independent of gear rotation speed. The small module size makes it ideal in applications where space considerations are of concern. The rugged design allows the operation of these sensor assemblies in hostile environments where dirt and oil are major problems.
Specifications
Operating Temperature: -40 to 125°C (-40 to 257°F)
Input Volgate: 4.5 to 24 Vdc
Output: NPN open collector output– sinking up to 20 mA
Connection: 3-wire 22 AWG with stripped leads 1 m (40') long
Mounting: Can be mounted in any orientation
Material: Cylindrical aluminum housing
Dimensions: 25.4 mm L (1') x 11.9 mm diameter (15/32')
For installation and wiring instructions... see 'Specs' above for details.
Specifications
Operating Temperature: -40 to 125°C (-40 to 257°F)
Input Volgate: 4.5 to 24 Vdc
Output: NPN open collector output– sinking up to 20 mA
Connection: 3-wire 22 AWG with stripped leads 1 m (40') long
Mounting: Can be mounted in any orientation
Material: Cylindrical aluminum housing
Dimensions: 25.4 mm L (1') x 11.9 mm diameter (15/32')
For installation and wiring instructions... see 'Specs' above for details.
Rated 5 out of
5
by
Dave Hx from
Good quality & easy to mount
Works perfect for our 20hp fan motor as an RPM sensor
Date published: 2022-03-22
What is the maximum air gap to the magnet for mounting this sensor?
Thank you for your question, There really isn’t a MAX spec on this because it depends on target size and material. In practice, set the sensor as close as possible and back away until optimal performance is achieved.
Date published: 2020-04-29
Whether the above sensor be interfaced with Arduino or Raspberry Pi?
Sorry, we have never tested this with Arduino or Raspberry Pi. This device generates a series of pulses proportional to the rate of rotation.
Date published: 2020-04-06
