Probes with Lead Wires

Configurable thermistor probes for immersion applications with 316 SS sheath, strain relief spring and PFA extension cable. Available with selection of resistances and sizes.

1/16",or 1.5mm diameter RTD probes available with lead wire, 3-prong connector, or handle probe. Small size provides maximum sensitivity and response time to temperature.

Thermocouple probe has a metal transition between the sensor & cable. Cable has BX armor or Stainless Steel Overbraid to protect from damage and a mini connector attached.

Thermocouple probe connects directly with your computer via the provided USB connector. Free software allows for temperature data to be displayed directly on your screen.

Immersion probe with bracket for easy mounting. Often used in appliance & lab temp applications up to 500°C. Great for air, gas, or liquid measurement.

Thermocouple probes that can be cut to the desired length with a standard tube cutter to fit field applications. Plastic plug in tube end protects the wires from sharp edges.

Thermocouple probes with 1/16" OD & a .020" diameter reduced tip for enhanced response to temperature change. Metal transition joint with PFA insulated cable & mini connector.

Short RTD Probe

Probe contains an integrated circuit (IC) transducer AD592CN that provides an output in microamps that is proportional to temperature. Requires 4 to 30 VDC input voltage.

Class A, pt100 RTD probes have a copper tip that provides enhanced temperature response. Available in 2, 3, or 4 wire configurations and various sizes.

Spring-loaded quick-connect bayonet style RTD probes with armored cable. Commonly used in extruder & molding equipment. Both Straight and bend options available.

Thermocouple probes with cable that is Silica ceramic fiber insulated and is rated up to 815°C with Inconel Overbraid to protect it from damage.

Family of 100 ohm, Class A accuracy RTD sensors including surface mount, bolt down, immersion, air sensing and screw down designs.

Family of linear thermistor sensors with lead wire including cable, surface, air, and immersion probe styles. All come with resistor sets to linearize the output.

Thermocouple probe has a section of coiled 304 SS cable that allows the probe to extend and retract as needed for use in steam washdown and other applications.

Probes with Stainless Steel Tips for use under the high pressures and temps found in plastic extruders. Available in single & dual element options with 1/2"-20 NF threads.

Most Thermocouple Probe Styles, Handle, Molded Junction, Quick Disconnect, Heavy Duty, and Well KHSUP, KTSUP, KQSUP, TJ36CASUP, NB1-CASUP

This family of thermistor sensors includes ten different designs including some for Air, Surface, Immersion and Industrial applications. Various sizes & resistances available.

Probes with Hastelloy Tips for use at the high pressures and temperatures found in plastic extruders. Available in single and dual element options with 1/2"-20 NF Threads.

Sensor has a flanged housing and small diameter probe to allow easy mounting into ducts and flow systems. Low thermal mass for rapid response to temperature changes.