OEM Style, Compact Pressure Transmitters with Mini DIN
0 to 150 psi, Gauge Pressure
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $127.08 |
| 10-24 | $120.73 |
| 25-49 | $118.18 |
| 50-99 | $113.10 |
| 100+ | $110.56 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Compact and affordable for OEM applications
- Easily configurable, now with expanded options
- Reliable outputs with signal conditioning
- Durable, stainless steel housing resists corrosion in harsh industrial environments
PX119-150GI Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Pressure Range Max
Pressure Range
Pressure Type
Accuracy Class
Output Signal
Electrical Output
Pressure Port Size
Connection/Termination
Pressure Range Unit
Pressure Range Min
Accuracy Value(compensated range)
Pressure Port Type
Operating Temperature Range
- Accuracy Value 0.50% BFSL Accuracy
- Vibration 10 g (20 to 2000 Hz) for <58 psi (4 bar); 20 g (20 to 500 Hz) for ranges >58 psi (4 bar)<
- Wetted Materials 304 SS and Ceramic Al2O3, NBR Standard
- Accuracy 0.50% BFSL Accuracy
- Compensated Temperature 0 to 85°C (32 to 185°F)
- Operating Temperature -40 to 135°C (-40 to 257°F)
- Supply Voltage 8 to 30 Vdc
- Weight 70 g (0.15 lb)
- Output 4 to 20 mA, 0 to 5 Vdc
- Response Time 1 ms
- Construction 304 SS
- Ingress Protection IP65
- Long Term Drift <0.3% FS
- Output Connections Cable, M12, DIN 43650C (mini DIN)
- Output Wiring Pin 1: Supply +, Pin 2: Supply -
- Pressure Range 15 to 5000 psi (345 bar)
- Process Connection 1/4 NPT Male, 1/8 NPT Male
- Protection Overvoltage, short circuit, reverse polarity
- Thermal Error 7.5 psi ≥ 100 psi: 0.01% FS/°F (0.018% FS/°C) 100 psi > 400 psi: 0.009% FS/°F (0.016% FS/°C) 400 psi ≥ 1000 psi: 0.011% FS/°F (0.019% FS/°C) 1000 psi > 3000 psi: 0.012% FS/°F (0.021% FS/°C) 3000 psi ≥ 5000 psi: 0.018% FS/°F (0.028% FS/°C)
Pressure Without the Pain
Ideally suited for material handling, industrial and mobile equipment applications where a small, yet rugged SS body size is desired at a reasonable price point. The body is machined from a single piece of stainless steel to provide added protection for the internal electronics as well as prevent corrosion from most applications. A piezoresistive ceramic sensor along with ASIC signal conditioning provides an excellent thermally compensated output.
- SIMPLE
- MULTIPURPOSE
- COMPACT
Monitor pressure/height in vehicle suspension
Regulate pneumatic door operation
Monitor excessive load
Monitor lift operation
Monitor compact pressure
Monitor lift operation
Monitor compact pressure
- Great cost: performance ratio
Accuracy: 0.5% BFSL - Large pressure range
15 to 5000 psi (absolute or gauge) - Piezoresistive ceramic diaphragm
Excellent thermally compensated output
Operating temp: -40 to 135°C (32 to 185°F) - Reliable output with signal conditioning
Output: 4 to 20 mA or 0 to 5 Vdc
Input: 8 to 30 Vdc
Response time: 1 ms - Rugged form factor
Shock and vibration resistant
10g for <58 psi/20g for >58 psi - Resists corrosion and water
304 SS body
Wetted materials: Ceramic AI2O3, NBR
Rated 5 out of
5
by
Edan Prabhu from
Transducers
Nice job. Good service efficient they sent the stuff on time
Date published: 2021-02-13
Rated 5 out of
5
by
Nick I from
High quality part
Very well built and the din connection is a nice bonus.
Date published: 2021-02-04
Rated 5 out of
5
by
Anonymous from
Great, simple transmitter
Great pressure transmitter for the price, included DIN connector makes wiring very straightforward. Has a good resolution and is very compact.
Date published: 2020-04-02
Rated 4 out of
5
by
kriss from
good
value for money: they are good, practical and low cost
Date published: 2018-08-08
Can the PX119 product be used with fuels, oils, and air?
The wetted parts for the the PX119 are 316 SS, ceramic, and Nitrile rubber (NBR). The wetted parts are the surfaces that will come in contact with the process fluid. While we cannot speak for all oils, or fuels. The wetted materials of the PX119 are generally resistant to oil, fuel, and other chemicals. We recommend that users investigate material compatibility for their specific application if they have any concerns.
Date published: 2019-05-10
Does the PX119 come with a calibration certificate?
No, however, one can be provided upon request for an additional cost, or we recommend looking into our PX309 series. https://www.omega.com/pptst/PX309.html
Date published: 2017-10-09
What is the minimum purchase quantity?
There is no minimum purchase quantity for this product.
Date published: 2017-10-09
Where can I order the terminal connector?
Hello, the PX119 comes with a 20 mm mating DIN connector. Additional options can be found here: https://www.omega.com/pptst/CX5300.html - If you have any additional questions please do not hesitate to contact our customer service. Thanks!
Date published: 2017-11-02
Will this sensor work for measuring steam pressure. Expect a maximum pressure of 10 psig (240F). Is a syphon required? Are installation instructions available?
The maximum Operating Temperature of the PX119 is 257F. The maximum Compensated Temperature is 185F. We suggest using a stand-off between the sensor and the pressure source to drop the temperature below 185F
Date published: 2020-12-02
Is the product CE compliant?
Yes, this product meets the CE requirements.
Date published: 2018-02-26
How do I read the pressure? Which accessory do I need and how do I install?
Hi, thanks for contacting us. To read the pressure transmitter you can hook it up to the DPPT digital panel meter. Please contact our Technical Support team if you need any assistance with hook-up.
https://www.omega.com/pptst/DPPT_SERIES.html
Date published: 2018-07-31
I am using this pressure transducer in conjunction with water, can water flow into the mini DIN connector ? If not, how can I prevent water from flowing into this space and get a pressure reading?
Unfortunately, the unit PX119 is not a waterproof unit so the application that you have mentioned (water flowing into the connector) will not work. We do sell submersible units that are great for that application like the PX709 series. All those would be a bigger investment. You could try and RTV the entire PX119 to see of you would give you a waterproof seal? The main issue is trying to keep an electrical connection dry! Thanks for connecting with us, let us know if you have any further questions.
Date published: 2019-05-15
Is this UL listed or recognized?
Thank you for your question?
This is regarding your question about UL approval. it is CE approval not UL .
A linc has been sent.
hope this was helpful.
Date published: 2020-07-13
Can these be submerged in water for cleaning?
Thanks for contacting Omega. We would not recommend submerging the PX119 in water for cleaning. The connector is only IP65 rated. Please contact our Tech Support if we can be of any further assistance.
Date published: 2018-06-14
I was wondering what the SK number references on the part (SK#####). I ordered two transducers at two different times - same pressure (PX119-3KGI), but with different SK numbers. Is this your equivalent of a SKU? If so, why would they be different?
Thank you for inquiry. Yes the SK# is our internal SKU#. We have no idea why a the number was changed.
Date published: 2020-08-27
Is the conversion/curve between current output and pressure linear for all regions? I.e. 4 mA output corresponds to 0 and 20 mA corresponds to the maximum (15 Psi Gauge for mine). Does 12 mA correspond to 7.5 Psi Gauge?
Thanks for your question. Yes, the output should change linearly from 4 to 20 mA, through the range of the device 0-15 psi, meaning the 12 mA corresponds to 1/2 of the range of the device, or 7.5 psi G in this case. Feel free to contact our Tech Support if you have any further questions.
Date published: 2019-01-17
Can this be used to measure a gas mix of 75% hydrogen and 25% Nitrogen?
Thank you for your inquire
That is a tough question.
The Wetted Materials:are 304 SS and
Ceramic Al2O3, NBR Standard .
These are not intrinsically safe and you may want to go with a all stainless unit like the px309 or px409
or the IS units?
Date published: 2021-09-22
Can the 1/4 NPT male port be connected into a tee fitting, to which it would measure the pressure of water directly? The rest of the transducer would not be exposed to water or submerged in water, but water will be free to flow into the male port.
Thank you for reaching out to us with your question. Yes, it can. The wetted parts are Ceramic, NBR 304 SS - all are compatible with water.
Date published: 2020-07-24
How is the zero/span adjusted for this transducer?
Thank you for contacting Omega. This transducer does not have any capability to adjust the outputs. The PX509 or PX51 are products that offer trim pots to make these sort of adjustments. Please contact our Tech Support if you need any further assistance. https://www.omega.com/pptst/px51-pxm51-series.html
Date published: 2019-02-19
What is the maximum media temperature? I am using the sensor to measure the steam vapor pressure inside a chamber and the temperature of the steam can go to 100 degree C. The housing of the sensor is exposed outside of that chamber.
Thank you for your inquiry, this sensor has an operating temperature of -40 to 135°C (-40 to 257°F)
Date published: 2022-11-30
Hello! Please help me with the wiring connection to hook the PX119 - 150GI to my LabVIEW NI- 9485 DAQ. Thanks!
This is a 2-wire current transducer. Please use the link below to view our Tech Note for the wiring shown in Figure 3 - use this as a reference and confirm with National Instruments for the wiring to your device.
https://www.omega.com/techref/press-trans.html
Date published: 2019-05-10
Are any other cables compatible with this transducer than the ones listed above? I need one rated for <1000psi and in a shorter time than 6 weeks.
Sorry, due to our error, the cable specs were updated from 1000 to 100 psig. Now the vented cable that’s in stock may work for your application. Please do not hesitate to call our Tech Support if you need further assistance.
Date published: 2017-11-07
What is the pin spacing on the DIN 43650C connector? 8mm? 9.4mm? something else?
Contact spacing on the din connector is 9.4 mm.
Date published: 2021-11-12
Is there somewhere I can find a Wiring diagram for this?
Thanks for contacting us, please refer to the user manual, plus this link has some added detail that may be helpful (Figure 3): https://www.omega.com/techref/press-trans.html
If you need any further assistance, please feel free to reach out to our Technical Support team.
Date published: 2019-07-25
Will the 0 - 15 psia version be able to accurately read 0.001 PSIA?
The base accuracy for the PX119 is ±0.50% of full scale, for a 15 psi device this would translate to
15 psi * ±0.005 = ±0.075 psi. This means that for any measurement, like one that indicates 0.001 psi, we must include the uncertainty - meaning we cannot say its value is exact - so we would say that the measurement is 0.001 ±0.075 psi. Additional uncertainty comes from other effects like temperature or the device reporting the output of the device.
Date published: 2019-01-17
What lcd panel meter would you recommend for this transducer?
We suggest the using digital display model number DP8PT. 1/8 DIN panel size 4-digit scalable display. A full datasheet is available for this product on our website.
Date published: 2022-08-23
What is the frequency response of this transducer? I need to accurately resolve pressure cycles (200 to 1200 kPa) at roughly 60 Hz. If I can sample the output signal quickly enough, will the output signal accurately reflect these pressure fluctuations?
Hello, thank you for contacting Omega. The response time of the device is 1 MS; meaning it can resolve or output a step change in input in one-thousandth of a second. This is more than 10x faster than 60 Hz, and it should effectively capture the event.
Date published: 2019-11-01
Can this be use for oil?
The wetted parts for the PX119 are 316 SS, ceramic, and Nitrile rubber (NBR). The wetted parts are the surfaces that will come in contact with the process fluid. While we cannot speak for all oils or fuels. The wetted materials of the PX119 are generally resistant to oil, fuel, and other chemicals. We recommend that users investigate material compatibility for their specific application if they have any concerns.
Date published: 2019-05-02
Can this transducer be used for measuring GLP GAS pressure?
This sensor cannot be used to measure GLP Gas
Date published: 2021-02-25
Can NIST traceable calibration documentation be shipped with this product?
Thank you for your inquiry?
This part doesn't come with a cert.
We do have many other like the px309 series and px409 series that do.
hope this was helpful?
Date published: 2020-02-12
What is the maximum pressure that the PX119-600AI can withstand without damage to the transducer?
Hello, this data can be found on the product spec sheet. Please note, to understand the table there are 2 values overload and burst. Proof is the safe pressure limit for when below the sensors output will not permanently change. Burst is the safe pressure limit, above which the sensor may break-open under pressure. For the PX119-600AI:
Proof is 241.7% so 600*2.417= 1450 psi
Burst is 2901% so 600*2.417= 1740 psi
Date published: 2019-04-24
