Configurable, High Accuracy Pressure Transducers
16 to 32 inHg, Barometric, 4 to 20 mA, 1/4" NPT Male, Cable, (-49 to 240 °F)
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $1,066.03 |
| 10-24 | $1,012.73 |
| 25-49 | $991.41 |
| 50-99 | $948.77 |
| 100+ | $927.45 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- FAST DELIVERY!
- Fast Response Time
- High ±0.08% BSL Accuracy
- High Precision Performance
- 5-Point NIST Traceable Calibration Included with All Models
- All Stainless-Steel Wetted Parts (IP67/IP65 Ratings)
- Advanced Data Logging/Digital Communication (USB/RS485) Functions
- Wide Selection of Analog Output Signals
- Popular Electrical Termination Options
- Diversified Pressure Ranges for All Pressure Types
- Build/Order Custom Transducers Using Configurator
PX409-16BI Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination or click the CONFIGURE button to build your own.
Pressure Range
Pressure Type
Accuracy Value(compensated range)
Output Signal
Electrical Output
Pressure Port Type
Connection/Termination
Operating Temperature Range
Additional Features
Accuracy Class
Pressure Port Size
- Input Resistance 5000 Ω ±20% typical
- Output Resistance 5000 Ω ±20% typical
- Shock 50 g
- Repeatability ±0.08% BSL maximum
- Vibration 5-2000-5 Hz
- Wetted Materials 316L Stainless Steel
- Zero Balance ±0.5% FS typical 1% maximum (1% typical
- Accuracy Value 0.08% (compound ranges calibrated only in positive direction)
The Most Popular Ranges and Configurations are Stocked for Immediate Delivery.
OMEGA’S high accuracy PX409 Series Pressure Transducers have a proven record in high-performance commercial and aerospace applications for over 25 years. A full Wheatstone bridge is diffused into a silicon wafer and then micro-machined to exacting standards to produce a silicon sensor that has excellent stability, linearity, repeatability, and excellent long-term stability. At our state-of-the-art facilities, transducers are calibrated using extremely high accuracy equipment, and a 5-point NIST traceable calibration certificate is included with each model. All Stainless Steel wetted parts, welded construction and premium temperature compensation makes transducers suitable for use in tough industrial environments. OMEGA’s free downloadable Software provides advanced data logging capabilities hence add value and flexibility to your transducer performance.
Build/Order/Ship OMEGA’S MM Series Custom Pressure Transducers to meet your pressure sensing requirements: As a lead pressure transducer manufacturer, Omega has developed a new interactive configuration tool that provides a fast and simple way to build custom transducer suitable for application. MM Series custom transducers allow for over 1-million possible combinations of parameters such as pressure type, range, unit, material, output, accuracy, fitting, temperature compensation range, and electrical termination. At the end of the process, the Configurator will provide a part number, price and delivery time for the transducer. For more information about Configurator, Options Selection and FAQs.
SPECIFICATIONS
Specifications/Model | PX409 Series Standard Pressure Transducers | PX409 Series Hermetically Sealed Gauge (Imperial) | PX409 Series High Speed USB Output Transducers (Imperial/Metric) | PX409 Series RS485 Output Transmitters |
Accuracy | ±0.08% | ±0.08% | ±0.08% | ±0.08% |
Pressure Type | Gauge, Absolute | Sealed Gauge | Gauge, Absolute | Gauge, Absolute |
Output | 0 to 10 Vdc | 0 to 10 Vdc | Digital-USB | RS485 |
Electrical Terminations | Cable | Twist-Lock | Cable (Std USB Connector Termination) | M12 Connector |
Operating Temperature Range | -45 to 121 °C (-49 to 250 °F) or | -45 to 121 °C (-49 to 250 °F) or | -40 to 85 °C (-40 to 185 °F) | -40 to 85 °C (-40 to 185 °F) |
Key Features | 300% or 400% Proof Pressure | Hermetically Sealed for the Harsh Environments | 1000 Reading/Second | Up to 640 Readings/Second |
Data Sheets | PX409 Gauge-Absolute-Vac-CG-Barometric Pressure Transducers | PX409 Hermetically Sealed Gauge Pressure Transducers | PX409 High Speed USB Output Pressure Transducers | PX409-RS485 Output Pressure Transmitter |
* Extra High Accuracy (±0.05% or ±0.03%) Models Available
* Visit Accessories section for compatible Accessories
Some of the most Popular Applications of Pressure Transducers include:
What is the accuracy of the PX409 Series?
The PX409 Series has a high accuracy of ±0.08% BSL and includes linearity, hysteresis, and repeatability. To obtain their high accuracy and stability, the PX409 Series uses state-of-the-art digital mapping of the temperature, pressure, and output performance of the silicon sensor in conjunction with a custom ASIC to provide dynamic thermal compensation across the temperature and pressure parameters.
Is the PX409 Series suitable for any liquid and gas applications?
OMEGA piezoresistive pressure transducers have a proven record in high performance commercial and aerospace applications for over 25 years. The piezoresistive process and the construction of the PX409 Series provides a very rugged transducer with exceptional accuracy, stability, and thermal effects. The PX409 Series is all stainless steel (316 SS) wetted parts. Please ensure the media under measurement is compatible with wetted parts.
What is the power supply for the PX409 Series?
The power supply of the PX409 Series depends on the output of the chosen model and power supply fluctuation protection is standard on all models. Please refer to the table below for details.
| Output Model | Power Supply |
| 0 to 5 Vdc | 10 to 30 Vdc@10 mA |
| 0 to 10 Vdc | 15 to 30 Vdc@10 mA |
| 4 to 20 mA | 9 to 30 Vdc |
| 10 mV/V | Ratiometric 5 to 10 Volts DC |
Is the PX409 Series calibrated?
The Px409 Series are calibrated using extremely high accuracy equipment and a 5-point NIST traceable calibration certificate that is included with each transducer. It is recommended that the sensor be recalibrated once a year. The most popular ranges and configurations are stocked for immediate delivery. All others typically have a very short lead-time.
How can I install a PX409 Series in a pipe? Does it need a specific orientation (vertical or horizontal)?
The PX409 Series has a ¼ - 18 NPT male fitting that is threaded into a pipe fitting for installation. There is no specific orientation needed – the unit is calibrated in the vertical direction with fitting down. The sensor is designed to be quickly customized to meet your exacting specifications, often with fast delivery.
Rated 5 out of
5
by
DdbB from
Great product
Great product. Works well. Software is simple and easy.
Date published: 2021-05-12
Rated 5 out of
5
by
Anonymous from
Precise, repeatable, and easy to use
These sensors replaced some older models that weren't rated for the pressure in my application. The new ones seem very reliable and the sensor-to-sensor variation between the two that I bought is much smaller than it was for the old ones.
Date published: 2020-10-06
RoHS 2015/863 - View Certificate
CE Approved
UKCA
I'm trying to locate the free software that accompanies this product, could you please provide the link?
Hello, and thanks for connecting with us. The software icon, for the free software download, is located in under the bullet points (before the Description copy) on the product page https://www.omega.com/pptst/PX409-485_PXM409-485.html
Please contact our Tech Support if have any further questions.
Date published: 2019-10-09
I have PX409-050A5V, what is the transfer function y=mx+b of Pressure vs Voltage output?
Thank you for your inquiry, the information you're requesting will be located on the certificate of calibration.
Date published: 2022-04-08
It says that this sensor is recommended to be calibrated once a year, is the calibration procedure included with the sensor, or is calibration handled by a third party organization?
Thank you for your inquiry, we do not include a calibration procedure, however we do offer calibration services.
Date published: 2021-12-09
What is the recommended calibration frequency for these pressure transducers?
The NIST traceable calibration report shipped with the sensor is valid for 1 year after the sensor ships from Omega. We recommend recalibration once a year calibration cycle.
Date published: 2021-04-27
I'm trying to locate the free software that is advertised for this product, could you please provide the link?
Thanks for being an Omega customer. The free software is available here for this product: ftp://ftp.omega.com/public/DASGroup/products/USBH/
Date published: 2021-10-25
Will MMDDU2.5V10P4C5T1A3, listed as uni-directional differential pressure, 0-2.5 psi, read vacuum if the low pressure port is connected to the vacuum process and the high pressure port open to atmosphere?
Yes it will. You will see an increase if the 0 to 10VDC output signal if a 0 to -2.5 PSI is applied to the Low port
Date published: 2022-03-21
I have a PX409-3.5KGUSBH model transducer that currently reads absolute pressure. Can I calibrate the transducer in house to read relative gauge pressure instead?
Thank you for your inquiry
While the construction of a gauge or absolute sensor is fundamentally different, in this case where your sensor has a range of 3,500 psi A is so large it should be fine. This issue is that an absolute sensor has no way to react to changes in atmospheric pressure like a gauge sensor does. The typical worst-case limits in atmospheric pressure changes (if you don't change your elevation) are between 13.5 – 15.0 psi, or about 1.5 psi, this is only (1.5/3500*100) = 0.04% FS change for the sensor, smaller than the error band! You can safely ignore atmospheric pressure changes for this device and offset your device to represent a gauge pressure reading.
hope this was helpful?
Date published: 2022-08-03
We have pressure transducer model number PX409-050A10V, for which we'd like to know its leakage specs and/or hermeticity rating... is that data available please?
Thank you for your inquire
Overpressure Absolute Pressure:
5 psia: 6 times span
2.5 psia to 1000 psia: 4 times span
1500 to 5000 psia: 10,000 psi
maximum
Secondary Containment
Gage/Diff/Vac/Compound:
10 inH2O to 5 psi: To 1000 psi
15 to 1000 psi: To 3000 psi
1500 to 5000 psi: To 10,000 ps
Date published: 2022-05-19
is the USB pressure sensor communication documented so it can be used with a language like LabVIEW? i would expect it shows up as a serial port and has a communication protocol to read values.
Thank you for your inquiry, Omega doesn’t support LabVIEW, but customers have told us they use our USBH sensors with LabVIEW : The easy-to-use ASCII data protocol of the USBH sensors can be handled with a standard LabVIEW VI like: Basic Serial Write and Read.vi. (While Omega gladly provides support for our .NET API, we cannot provide support for implementation as a part of LabVIEW). ). If you have any additional questions please contact our customer support department.
Date published: 2022-04-15
I thought the sensor will come with a USB plug cable, but it doesn't. How should I connect the cable to a USB plug? What kind of USB plug should I get for it?
There are two versions of the PX409 Pressure Transducers. One version as an analog output of millivolts, Voltage or Current. The other version has a high speed USB output. It appears you have the analog output version with would not have a USB connect on it. You would need to purchase a new PX409 with the part number ending in USBH. This unit has an attached cable with the USB connection on the end
Date published: 2021-05-07
What is the HSN (Harmonized System Nomenclature) code for the PX409-015CGUSBH and PX409-015GUSBH sensors?
Thank you for your inquiry, please contact us directly to obtain the HSN number
Date published: 2022-10-14
Do you have documentation that describes the serial commands for the RS-485 interface (or the modbus registers)?
Thank you for your inquiry, we do offer a quick start manual for the RS485 sensors. This document can be found in the product manual section of our website ( PX409-485 and PXM409-485) if you require additional information please contact one of our Pressure engineers
Date published: 2022-08-19
Hello, we need to measure up to 20 Bar pressure absolute. You offer a 17.5 Bar and 30 Bar option. Would the 17.5 Bar sensor report up to 20 Bar, and without causing damage?
Hello, Thank you for contacting Omega Engineering. If you want to measure 20 bar absolute you should not use the 17.5 Bar absolute unit, you may damage the diaphragm. Please go with the 30 bar absolute model. Thank you.
Date published: 2019-10-11
What is the weight for part# PX459-100GI
Thank you for your inquiry, this unit weighs less than 2 pounds
Date published: 2022-11-01
I need to get accuracy and range on this. Can you please help
The three available accuracy ranges these sensors are 0.03%,0.05% & 0.08%. Accuracy is based on the full scale range of the sensor. Available pressure ranges from a low range of 0 to 10"wc up to 0 to 7500 PSI
Date published: 2019-11-21
I'm trying to locate the free software that is advertised for this product, could you please provide the link?
Thanks for your question. The free software is available here for this product: ftp://ftp.omega.com/public/DASGroup/products/USBH/
Date published: 2022-02-01
What do you recommend if we exceed the proof pressure of 300%? Is the equipment still good to use? Would you recommend recalibration?
Avoid exceeding the proof pressure rating of the sensor. You will damage the sensing diaphragm of the unit. It will most not be calibratable once damage
Date published: 2021-02-09
I am trying to locate the system requirements for the software.
The system requirements are: An up-to-date Windows 7, SP1; .NET Framework 4.5.2 (part of Microsoft’s automatic updates); USB 2.0 port. (USB 3 also works). Please contact our Tech Support if you need any further assistance.
Date published: 2019-05-06
Would the 0 to 350 mbar range transducer be accurate enough to read a 1/10 of a mbar? We are mostly interested in looking at absolute pressures ~1/10 to 10 mbar.
Accuracy specification for this unit is 0.08%. This means your allowable error for the 0 to 350mbar range unit would be +/- 0.28 mbar. This would not be accurate enough for your requirement.
Date published: 2019-11-21
PXM-409-350BGUSBH /Serial Nummer: 748240 Pressure-Transducer doesnt get recognized. Fault message is: Dieses Gerät wurde angehalten, weil es Fehler gemeldet hat. (Code 43) Fehler bei einer Anforderung des USB-Gerätedeskriptors.
This sensor should be return to Omega for evaluation. Please contact our Customer Service for a Return Authorization
Date published: 2021-02-08
I have brought 8 of PX459-500GI and I'm looking for a wiring diagram for them, they have and M12 cable
Thank you for your inquire.
The wiring is shown on the calibration sheet that is included. We can also generate a new copy if the do not have it.
Please contact us at pressure@omegfa.com. For a copy if needed.
Please include the serial number.
Date published: 2021-05-10
Hi. Is it possible to re-range existing sensors? We have a few 409 series pressure transducers that we would like to calibrate for another pressure range than that originally purchased for.
Thank you for your inquiry, due to the construction of the PX409 series it is not possible to calibrate to a different range and maintain the accuracy.
Date published: 2022-10-07
The wiring for Model PX409-015G5V Shows the red wire is + EXC. What is +EXC and how is it applied? It different than +24vdc supply?
Thank you for your inquire
Please contact us directly to review in detail your wiring question.
Date published: 2022-06-09
How do I install this sensor in a pipe?
This sensor has a 1/4 npt male pipe thread as it's process connection. You will need to install a 1/4 npt female fitting on your pipe. On small diameter pipes you can usually install at tee fitting in-line with the pipe that would have this connection.
Date published: 2020-10-15
Does the pressure transducer have a specific install orientation? Any problems with a horizontal verses vertical install?
Typically the readings are not effected by orientation. You may see a shift in the readings on the very low pressure range (0 to 10"H2O and 0 to 1 PSI) if you change orientation but you should be able to calibrate that out in your readout device.
Date published: 2021-02-11
On the Omega software for USB PT: If anything happens that makes the program freeze up (unplugging the PT) or laptop die (power out) the past data seems lost forever. I've looked for a log file but cannot find anything. How can I recover the data?
You can recover the data as long as you haven't started logging again. I am sending a pdf which contains a troubleshooting guide that should help you locate the logged data. Emailing it to dda@alumni.caltech.edu
Date published: 2022-07-12
Can the PX409 series be used to measure oil pressure? I cannot find any info stating the acceptable mediums.
Thanks for your Question. The PX409-001CG10V is a 316 Stainless Steel unit that can be used to measure oil. Please check your oil chemical compatibility with 316SS. Please call or email us at pressure@omega.com with any further questions.
Date published: 2019-06-20
ACCESSORIES
The M12 connectors can be attached to existing sensor or extension cables with a 6 to 8 mm cable diameter in the field by means of screw type connections
$37.12
171 In Stock
5 m (16') PVC cable, straight 4-pin M12 female connector one end, flying leads one end, for all PX359 absolute range and gage ranges >100 psi
$22.76
21 In Stock
M12 Extension Cable, 4 Wire PVC Cable, Right Angled Socket Connector One End and Flying Leads the Other, 5 meters long
$22.76
47 In Stock
COMPATIBLE METERS AND ACCESSORIES
4-digit precision process meter for use with voltage and current output models
$408.31
0 In Stock
