Excelon® Pressure Regulators for Compressed Air Systems and Pneumatic Control
Please contact Technical Sales Team for assistance. Any remaining stock is available for purchase
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- In-Line or Modular Installation
- Full Flow Gage Ports
- Balanced Valve Design Minimizes Effect of Variation in the Inlet Pressure on the Outlet Pressure
- Standard Relieving Models Allow Reduction of Downstream Pressure when the System is Dead-Ended
R72G-2AK-RCG Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Pressure Port Size
Pressure Port Type
Features
Pressure Range
Maximum Inlet Pressure
Media Type
- Body Material Zinc or Aluminum
- Media Type Compressed Air
- Minimum Ambient Temperature -34 {C} (30 {F})
The R72G series has been discontinued. Please contact our Flow Engineering department for a viable replacement.
The R72G Series Air Line Pressure Regulators are designed for use as a single in-line unit or as part of a Norgren's Excelon® modular compressed air preparation supply system. As a modular FRL component, this air regulator can quickly be attached to filters, oilers, smooth start / exhaust valves, safety lockout valves and pipe adapters. With our Quickclamp® and wall bracket accessories, a complete compressed air supply system can be assembled and mounted in minutes. This compressed air line regulator is designed to allow the inlet pressure to pass directly through the body to the next component, the outlet port is at right angles to the inlet port with full flow gage ports. This allows the units to be 'Quickclamped' together in a bank allowing multiple regulated pressures to be supplied from a single air supply source.
SPECIFICATIONS
Fluid: Compressed Air, Argon, & Nitrogen
Maximum Pressure: 20 bar (300 psig)
Pressure & Flow : Measured at 10 bar (150 psig) inlet and 6.3 bar (90 psig) outlet pressures
R72G Body Size: 33 dm³/s (33 scfm)
R73G Body Size: 68 dm³/s (144 scfm)
R74G Body Size: 105 dm³/s (220 scfm)
Pressure Drop: 1 bar (15 psig)
Operating Temperature*:
R72G models: -34 to 65°C (-34 to 150°F)
R73G & R74G models: -34 to 80°C (-30 to 175°F)
* Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F).
![]()
As a modular pneumatic component, this regulator can quickly be attached to filters, oilers, smooth start / exhaust valves, safety lockout valves and pipe adapters. With our Quickclamp® and Quickclamp® and wall bracket accessories, a complete compressed air supply system can be assembled and mounted in minutes.
The R72G Series Air Line Pressure Regulators are designed for use as a single in-line unit or as part of a Norgren's Excelon® modular compressed air preparation supply system. As a modular FRL component, this air regulator can quickly be attached to filters, oilers, smooth start / exhaust valves, safety lockout valves and pipe adapters. With our Quickclamp® and wall bracket accessories, a complete compressed air supply system can be assembled and mounted in minutes. This compressed air line regulator is designed to allow the inlet pressure to pass directly through the body to the next component, the outlet port is at right angles to the inlet port with full flow gage ports. This allows the units to be 'Quickclamped' together in a bank allowing multiple regulated pressures to be supplied from a single air supply source.
SPECIFICATIONS
Fluid: Compressed Air, Argon, & Nitrogen
Maximum Pressure: 20 bar (300 psig)
Pressure & Flow : Measured at 10 bar (150 psig) inlet and 6.3 bar (90 psig) outlet pressures
R72G Body Size: 33 dm³/s (33 scfm)
R73G Body Size: 68 dm³/s (144 scfm)
R74G Body Size: 105 dm³/s (220 scfm)
Pressure Drop: 1 bar (15 psig)
Operating Temperature*:
R72G models: -34 to 65°C (-34 to 150°F)
R73G & R74G models: -34 to 80°C (-30 to 175°F)
* Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F).
R72G MATERIALS Body: Zinc Bonnet: Acetal Valve: Brass Elastomers: Nitrile Bottom Plug: Acetal | R73G AND R74G MATERIALS Body: Aluminum Bonnet: Aluminum or zinc Elastomers: Nitrile Bottom Plug: Acetal |
I need a air pressure regulator to regulate pressure from 80 to 100 PSI, but it needs to be calibrated by a ISO 17025 accredited lab. Please suggest.
Thank you for your question. Unfortunately, we do not provide ISO 17025 calibration services at this time. Maybe in the future.
Date published: 2021-06-22
