10 Point Non-Reversible Temperature Label
Non-Reversible Temperature Labels, 10 Temperature Ranges
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $18.61 |
| 5-9 | $17.68 |
| 10-24 | $17.31 |
| 25-49 | $16.56 |
| 50-99 | $16.19 |
| 100+ | $15.82 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Ten temperature points per label
- Indicator turns black when exposed
- Actual size: 2.1" x 0.7" (54 x 18 mm)
- Sold in Packs of 10 and 30
- Many temperature ranges available see below!
TL-10-190-10 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Minimum Temperature Measurement
Maximum Temperature Measurement
Accuracy Value
Number of Labels
Reversible/Non Reversible
Number of Temperature Points
Form Factor
Response Time
Features
- Accuracy Value Up to 99°C (210°F) is ±1°C (1.8°F)
- Form Factor Adhesive backs for easy mounting
- Indicator Color Turns Black when exposed
- Measurement Units °C
Applications:
• General • Aeronautical • Electrical • HVAC • Most surface measurements.
SPECIFICATIONS
Accuracy: Up to 99°C (210°F) is ±1°C (1.8°F);
From 100°C (212°F) to 154°C (309°F) is ±1.5°C (2.7°F);
From 160°C (320°F) to 280°C (536°F) is ±1% and ±1°C (1.8°F)
TL-10 Series Labels, 10-Temperature Range
• General • Aeronautical • Electrical • HVAC • Most surface measurements.
SPECIFICATIONS
Accuracy: Up to 99°C (210°F) is ±1°C (1.8°F);
From 100°C (212°F) to 154°C (309°F) is ±1.5°C (2.7°F);
From 160°C (320°F) to 280°C (536°F) is ±1% and ±1°C (1.8°F)
TL-10 Series Labels, 10-Temperature Range
Model No | Temperature Ratings | ||||||||||||||||||||||
| TL-10-105(*) |
| ||||||||||||||||||||||
| TL-10-190(*) |
| ||||||||||||||||||||||
| TL-10-290(*) |
| ||||||||||||||||||||||
| TL-10-390(*) |
|
Rated 5 out of
5
by
211us from
works
Something that works as advertised!!!
Getting the information I had hoped to get.
Date published: 2016-02-14
Rated 5 out of
5
by
Sue2 from
Did the job
These had the temperature range I was looking for, and reasonable increments. Worked just fine on my project.
Date published: 2016-08-25
Rated 5 out of
5
by
et dan from
don't leave for home without this in place
FREIND gave me some so now can't live without so ordering my own
Date published: 2016-04-12
Rated 5 out of
5
by
Debbie Maverick from
Highly Recommend
Always great product and ships in a timely manner. Will buy again and recommend.
Date published: 2022-08-10
Rated 4 out of
5
by
Dave1 from
Thermal stickers worked as needed
Worked well for application on valves and positioners
Date published: 2022-03-27
Rated 4 out of
5
by
Dave1 from
Non-Reversible Temperature Labels
Items purchased were as described and were easy to install.
Date published: 2022-03-17
Rated 4 out of
5
by
Dave1 from
Non-Reversible Temperature Labels
Items purchased were as described and were easy to install.
Date published: 2022-03-17
Rated 4 out of
5
by
Dave1 from
Non-Reversible Temperature Labels
Items purchased were as described and were easy to install.
Date published: 2022-03-17
Hello, referring to an older inquiry: We'd like to use the labels for vaccum applications. Why is this not recommended? Is the reaction mechanism/precision altered or does the glue degas? What is the reaction mechanism of the sensors?
Hello again, thanks for the fast reply. In order to judge whether there might a deviating response it would be very useful if you could give details on the reaction mechanism, e.g if it requires atmospheric oxygen. Then the response might just be delayed.
Kind regards, Phil
Date published: 2021-01-17
What is the shelpf life of these tapes if stored in the fridge?
Shelf life is one year when stored in a cool dry location.
Date published: 2019-08-22
can we use it in vacuum chambers. 5e-6 at
Thank you for your inquiry. Unfortunately these labels are not suitable for vacuum applications.
Date published: 2020-10-23
Will these labels only measure surface temperature of where its mounted or the air around it too? (conduction/convection). Want to detect max temperature of product going through oven.
The Temperature Labels are designed to measure the surface temperature of what they are adhered.
Date published: 2021-11-19
It seems a strip could be cut into individual dots. Does cutting the strip into separate dots affect temperature indication or have other impact? Does cutting the strip risk leaking of a chemical or other material/liquid?
Thank you for your inquiry Peter. Cutting or modifying the strips in any way will permanently damage the strip and it will not longer measure temperature.
Date published: 2022-10-21
Does humidity affect the measurement non-reversible temperature labels? Does vapor from alcohol or another volatile cleaner/degreaser affect the measurement? If so, would the measurement be biased higher or lower than actual temperature?
Hi Tree,
Thank you for the inquiry. These are verified in non-condensing air environment on calibrated hot plate. Strong solvents /chemicals may affect materials and shift readings. Unfortunately we do not have test data for these conditions.
Best regards
OMEGA
Date published: 2022-05-31
I would like to apply these to a surface that will see up to 300 psi. How will that affect the reading on these strips?
Hi, our Tech Support engineer has connected with you to further assist. Please note: the product has this this note that can also be found under this series of temp label: "Not intended for use in pressure or autoclave applications. Any application involving pressure will cause questionable or even wrong readings." Thank you.
Date published: 2019-06-25
Does the surface to which you apply the label need to be 100% flat? If not, what is the most curved surface these labels can be applied to?
The Temperature Labels are flexible and can be attached to a curved surface. The bend radius has not been established but down to a 1/2" should be fine.
Date published: 2021-11-09
