UW Series Wireless Non-Contact Infrared Temperature Sensor
Non-Contact Infrared Temperature Sensor With Wireless Transmitter
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $620.19 |
| 5-9 | $589.18 |
| 10-24 | $576.78 |
| 25-49 | $551.97 |
| 50-99 | $539.57 |
| 100+ | $527.16 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- -18 to 538°C (0 to 1000°F) Measurement Range
- Adjustable Emissivity from 0.10 to 1.0
- Free Software Converts Your PC Into a Multi- Channel Chart Recorder or Data Logger
- One Receiver Works with Up to 48 Transmitters
- Low Power Operation and Sleep Mode For Long Battery Life
- Each Unit Transmits:Process Temperature, Ambient Temperature, Signal Strength and Battery Status
- Interfaces with UWTC-REC1 For 48-Channel PC Chart Recording and Data Logging or UWTC-REC2 (48-Channel Industrial Transceiver with 1-Channel Analog Output and Alarm)
- Log data with Omega Enterprise Gateway(OEG)
UWIR-2-NEMA Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Additional Features
Measurement Type
Number of Channels
Sensor Type
Sensor Connection
Form Factor
Range
Radio Frequency Compatibility
The new infrared sensor with wireless transmitter features a remote IR sensor and radio wireless transmitter in a NEMA enclosure. The miniature sensor head is ideal for measuring temperatures from -18 to 538°C (0 to 1000°F) in confined, hard-to-reach places and harsh environments.
Each unit measures and transmits: IR sensor reading, ambient temperature, RF signal strength and battery condition to the host and is displayed on the PC screen in real time using the provided software. When used with host receiver UWTC-REC1, data from up to 48 wireless transmitters can be received and displayed. Each unit includes free software that converts your PC into a strip chart recorder or data logger so readings can be saved and later printed or exported to a spread sheet file. When used with the UWTC-REC2, wireless data from one transmitter can be retransmitted by a wired connection as an analog voltage or current signal to interface with a controller, PLC or data acquisition board.
The UWTC-REC4 is a DIN rail mount wireless receiver that works with up to 48 wireless transmitters, and provides up to 4 analog outputs, that can be used for meters, recorders/data loggers, PLCs or other instrumentation.
The wireless transmitter is mounted in a NEMA-4 (IP65) plastic enclosure. When activated the unit will transmit readings continuously at pre-set time interval that was programmed by the user during the initial setup.
Each unit measures and transmits: IR sensor reading, ambient temperature, RF signal strength and battery condition to the host and is displayed on the PC screen in real time using the provided software. When used with host receiver UWTC-REC1, data from up to 48 wireless transmitters can be received and displayed. Each unit includes free software that converts your PC into a strip chart recorder or data logger so readings can be saved and later printed or exported to a spread sheet file. When used with the UWTC-REC2, wireless data from one transmitter can be retransmitted by a wired connection as an analog voltage or current signal to interface with a controller, PLC or data acquisition board.
The UWTC-REC4 is a DIN rail mount wireless receiver that works with up to 48 wireless transmitters, and provides up to 4 analog outputs, that can be used for meters, recorders/data loggers, PLCs or other instrumentation.
Can the internal USB port be used for connection to a PC instead of using the wireless connection?
Hello Matt,
The UWIR-2-NEMA usb port is only for configuration and is designed for wireless transmission only to a receiver that is connected to USB port such as UWTC-REC1. You may want to consider a IR-USB which is direct connection to USB port. Here is a link for you to evaluate.
https://www.omega.com/en-us/sensors-and-sensing-equipment/temperature/sensors/infrared-sensors/ir-usb-series/p/IR-USB?searchterm=IR-USB
Date published: 2019-08-28
Accessories
